Abstract
dc:descriptionThe shrinking of transistor's size in the Very Deep Sub-Micron (VDSM) technologies enabled the manufacturing of Multi-core Systems-on-Chips (MCSoCs) that contain billions of transistors. The exponential decrease in the transistor's manufacturing cost is the main contributor to the widespread use of electronic systems. However, due to manufacturing process imperfections, which cause manufacturing defects, electronic devices need to be tested for compliance with their specifications before they are shipped to customers. Testing of such complex systems becomes increasingly difficult and costly while the overall cost must remain below certain bounds.Manufacturing testing of Integrated Circuits (ICs) is conducted by expensive specialized Automatic Test Equipment (ATE) with limited resources, such as communication channels, memory and channels' bandwidth. Test cost depends on the time a chip spends on an ATE as well as on the utilization of these resources. An efficient testing method should be fast, accurate and must utilize the minimum number of ATE resources. At the same time, outdated ATEs are commonly in use due to the high cost associated with upgrading this equipment.To enable the testing of contemporary dense devices on outdated ATE's, Test Resource Partitioning (TRP) techniques emerged. According to TRP, testing architectures are embedded on chip and operate in synergy with ATEs in order to decrease test cost.Test cost is also affected by both the shrinking of transistor and the high integration of transistors in MCSoCs. As transistor shrinks the amount of tests that are required in order to achieve high defect coverage and assure quality goals increases, due to the ICs becoming more and more sensitive to physical phenomena. Moreover, the high integration of transistors in MCSoCs sets power consumption constraints during testing. Violations of these constraints during testing may cause circuits failures, which do not occur in the field. Power consumption constraints increase further test complexity, since the circuit consumes more power in test mode than in normal mode of operation. As a result, new low-power testing techniques are required in order to handle in a unified manner all test cost related objectives. In this dissertation methods are presented that target multiple test cost objectives. The methods proposed have been applied on both academic benchmark circuits.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tenentes, Vasileios
- Τενέντες, Βασίλειος
Subjects
dc:subject × 23- Κατασκευαστικός έλεγχος ολοκληρωμένων κυκλωμάτων
- Συμπίεση διανυσμάτων ελέγχου
- Χαμηλή κατανάλωση ενέργειας
- Ποιοτικός έλεγχος
- Έλεγχος πολυπύρηνων ηλεκτρονικών συστημάτων
- Έλεγχος κυκλωμάτων προστατευόμενης πνευματικής ιδιοκτησίας
- Μη-μοντελοποιημένα σφάλματα
- Manufacturing testing of integrated circuits
- Test data compression
- Design for testability
- DFT
- Low power scan-based testing
- Multi-core soc
- Ip cores
- Un-modeleded defect coverage
- Φυσικές Επιστήμες
- Επιστήμη Ηλεκτρονικών Υπολογιστών και Πληροφορική
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Natural Sciences
- Computer and Information Sciences
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
dc:rights- Statement dc:rights
-
- BY_NC_ND
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/30057