Back to search

National Technical University of Athens (NTUA)

Αναγνώριση βλαβών λειτουργίας υδραυλικών συστημάτων υψηλών πιέσεων

Abstract

dc:description

The doctoral dissertation deals with the fault identification process in high pressure hydraulic systems using computer based modeling techniques. In this scope, the Bond Graph modeling method was used in order to study how the operation of a high pressure hydraulic system under various loads is affected by the internal leakage in the hydraulic cylinder and the 4/2 way direction control valve. For this purpose, a hydraulic test rig which allowed the simulation of various loads and various degrees of internal leakage in the cylinder and the 4/2 way valve was implemented, complete with an integrated measurement and data acquisition system. The next step was the modeling of the hydraulic system using the Bond Graph Method. Α detailed model of the system was created, with phenomena such as the pressure drop due to flow resistance, the pump’s internal leakage, the friction and inertia of the cylinder’s moving parts as well as the fluid compressibility being included in the model of the system. After the modeling was completed, various tests were performed in the hydraulic test rig, followed by their equivalent simulation runs in the model for various loads and various degrees if internal leakage in the hydraulic cylinder and the 4/2 way valve, as expressed by the equivalent internal clearance for each component. For all the tests, the results from the modeling simulations were compared to their corresponding experimental test run and the correlation coefficients of the data sets were calculated. Additionally, third degree polynomial regression curves were formulated for each data set and the corresponding coefficient of determination was calculated for each data set. In all the tests and with every load and internal leakage combination the correlation coefficients between the simulation and the experimental data were very high, and, additionally, the coefficient of determination between all the data sets and the third degree polynomial regression curves was equally high as well. Thus, it was proven that the Bond Graph modeling method can be used as a fault simulation and diagnosis tool for high pressure hydraulic systems, which undoubtedly can prove useful in many practical applications.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Athanasatos, Pavlos
  • Αθανασάτος, Παύλος

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/30083

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Athanasatos, Pavlos; Αθανασάτος, Παύλος. Αναγνώριση βλαβών λειτουργίας υδραυλικών συστημάτων υψηλών πιέσεων. National Technical University of Athens (NTUA), 2013. http://hdl.handle.net/10442/hedi/30083