Democritus University of Thrace (DUTH)
Αντισεισμικές απαιτήσεις σχεδιασμού για τη δημιουργία δικτύων παροχής φυσικού αερίου σε υφιστάμενες και νέες κατασκευές
Abstract
dc:descriptionBuilding attachments are the non-structural elements that serveimportant functional and esthetic purposes. They are referred to assecondary systems because their excitation derives from the dynamicresponse of the building on which they are installed – this is referredto herein as primary system. Procedures for seismic design ofbuilding attachments are less advanced as compared to the currentdesign procedures intended for buildings. They are based on semiempiricalmethods that have been based on statistical evaluation ofthe limited records of the seismic response of such components onbuildings during strong ground motion. The insufficiency of thecurrent procedures for seismic design of building attachments isevident in the cases of strong earthquakes, where numerousattachment failures are often reported with important consequencesboth in the economical level and for safety.The present Thesis investigates the seismic design of buildingattachments, with small total mass ratios compared to the supportingbuilding, that are connected to R.C. buildings through multiplesupport points (generalized building attachments). Emphasis has beengiven in the seismic design of gas pipeline networks, as their seismicintegrity is crucial for the safety of the supporting building and itsoccupants.Initially, the maximum seismic response of generalized buildingattachments was investigated. It was proven that this class ofsecondary systems develops maximum seismic response, in terms ofdeveloped internal forces, at the state of the maximum horizontal roofdisplacement of the supporting building. This conclusion was derivedfrom the results of parametric time – history dynamic analyses ofcomplete models that encompass both the building and thegeneralized attachment and has been analytically confirmed by theformulation and solution of the dynamic equation of motion of thegeneralized building attachments. The deformed shape of R.C. buildings at the state of theirmaximum roof displacement was investigated parametrically throughparametric dynamic analyses of several R.C. building models. Bothsimplified and detailed models of multistory R.C. buildings wereproduced, accounting for different types of geometric configurationand were subjected to ground accelerations of different characteristics.It was shown that the deformed shape of R.C. buildings at the state ofmaximum roof displacement resembles their fundamental modeshape (i.e. the mode shape that activates the biggest percentage oftheir total mass), especially when the period of a building’sfundamental mode is in the range of the predominant period of theseismic vibration. This conclusion is further extended to nonlinearsystems, where the fundamental shape refers to the eigen-modeassociated with the secant stiffness matrix at the instant of peakresponse.To determine the fundamental mode shape of R.C. buildings withtorsional eccentricity without the need to conduct Eigen analysis, amethodology for composing the translational-torsional fundamentalmode shape of R.C. buildings from separate contributions totranslation and twisting through combination of the correspondingbasic modes of an associated decoupled system was developed. Thisenables the calculation of the degree of influence of the torsion to theoverall fundamental mode shape, as well as the determination of thevariation of drift demand that develops in an arbitrary member of thestructure due to twist.To enable the determination of the fundamental mode shape ofR.C. buildings that not comply with modern earthquake engineeringof R.C. structures (non-conforming R.C. buildings), a methodologyfor rapid determination of their seismic assessment has beendeveloped. The application of the methodology enables thedetermination of the weakest mechanism of resistance, likely tocontrol the sequence of failure of the vertical elements of thestructure and therefore the determination of the building’ s ShearCenters, that are essential to the determination of the fundamentalmode shape. The introduced methodology can also be used to guide seismic retrofit strategies of reinforced concrete structures in a rapid,yet efficient manner.Finally, a methodology for seismic design of new or seismicassessment of existing generalized building attachments to R.C.buildings has been developed. The methodology is presented in theform of simple steps, which can be executed either with sophisticatedor simplified calculations, according to the practical needs of eachapplication.
Degree
thesis:*- Grantor dc:publisher
- Democritus University of Thrace (DUTH)
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Pardalopoulos, Stylianos
- Παρδαλόπουλος, Στυλιανός
Subjects
dc:subject × 19- Αποτίμηση σεισμικής επάρκειας
- Κτίρια οπλισμένου σκυροδέματος παλαιού τύπου
- Δευτερεύοντα συστήματα
- Κτίρια με στρεπτική ευαισθησία
- Δίκτυα παροχής αερίου
- Σεισμική απόκριση κτιρίων οπλισμένου σκυροδέματος
- Θεμελιώδης ιδιομορφή κτιρίων οπλισμένου σκυροδέματος
- Seismic assessment
- Non-conforming reinforced concrete buildings
- Secondary systems
- Torsionally sensitive buildings
- Gas pipeline networks
- Seismic responce of reinforced concrete buildings
- Deformed shape
- Principal vibration mode of reinforced concrete buildings
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Engineering and Technology
- Civil Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/30147