National Technical University of Athens (NTUA)
Παραγωγή επιστρώσεων ανθεκτικών στη διάβρωση και στην οξείδωση με τεχνικές ηλεκτρικού τόξου
Abstract
dc:descriptionDuplex stainless steel 2205 (UNS S31803) is widely used in many engineering applications where a combination of mechanical strength and corrosion resistance is required. In this thesis, surface treatments of DSS 2205 were performed using the Plasma Transferred Arc (PTA) technique in order to expand the field of applications of this steel and to improve its performance in current applications. The hardness and the wear resistance of DSS 2205 was improved by introducing hard ceramic particles, namely TiC, TiB2, TiN and Al2O3, on its surface and thus producing a metal matrix composite (MMC) coating. The coatings produced with the addition of Al2O3 were further improved with the simultaneous addition of a solid lubricant (TiS2). The corrosion resistance of DSS 2205 was improved by introducing a considerable amount of nitrogen in its surface. The plasma and the shielding gas had the same composition, namely Ar+5 % vol. N2 and Ar+10 % vol. N2. The friction coefficient against an Al2O3 counterbody was slightly increased, compared to the as received DSS 2205, but the wear rate was reduced. The corrosion properties in 3.5 % wt. NaCl, 1 N H2SO4 aqueous solutions were improved, compared to DSS 2205, as well as the pitting corrosion resistance in FeCl3.6H2O solution. A combination of TiC and nitrogen introduced on the surface of DSS 2205 resulted in a MMC coating with titanium carbonitride (TiCxNy) as reinforcement and 0.65 % wt. nitrogen. X-ray diffraction measurements and Raman spectroscopy revealed that MMC coatings produced on the surface of DSS 2205 by adding TiC, with or without nitrogen addition, resulted in titanium carbonitride reinforcement. In the latter case, nitrogen was provided by nitrogen contained in the as received DSS 2205 (0.17 % wt. nitrogen). The wear resistance against an Al2O3 counterbody was improved compared to the as received DSS 2205 and to the TiC-reinforced 2205 coatings without nitrogen addition. The corrosion properties were improved relatively to the TiC-reinforced 2205 coatings without nitrogen addition. The addition of Ni powder on the surface of DSS 2205 substrate resulted in a fcc-(Ni,Fe,Cr) microstructure with 43 % wt. Ni, 43 % wt. Fe and 13 % wt. Cr. The corrosion properties in 3.5 % wt. NaCl, 1 N H2SO4 and FeCl3.6H2O aqueous solutions were improved, compared to DSS 2205. The resistance to oxidation in air, at 1000 oC, was also improved.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Ροκανοπούλου, Αικατερίνη
- Rokanopoulou, Aikaterini
Subjects
dc:subject × 20- Διφασικοί ανοξείδωτοι χάλυβες
- Επιφανειακές κατεργασίες
- Μεταφερόμενο τόξο πλάσματος
- Μικροδομή
- Κεραμικά σωματίδια
- Σύνθετα επιστρώματα μεταλλικής μήτρας
- Προσθήκη αζώτου
- Τριβή
- Duplex stainless steels
- Surface treatments
- Plasma transferred arc (PTA)
- Microstructure
- Ceramic particles
- Metal matrix composite coatings
- Nitrogen addition
- Wear
- Επιστήμες Μηχανικού και Τεχνολογία
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Engineering and Technology
- Other Engineering and Technologies
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/30307