Back to search

Aristotle University Of Thessaloniki (AUTH)

Πειραματική διερεύνηση της συμπεριφοράς πλαισίων οπλισμένου σκυροδέματος ενισχυμένων με χαλύβδινους συνδέσμους υψηλής απόσβεσης

Abstract

dc:description

This thesis study, experimentally the efficiency of a specific strengthening type which utilizes a small steel link element connected to the RC frame through bracing elements. The geometry of the frames is exactly the same in all the tested specimens but with two different reinforced arrangements. The bracing system is composed by two diagonal steel elements that are connected to each other at their top. At this point there is a steel plate on which the link element is welded. The top of the link element is connected to the midpoint of the beam. The inelastic deformations of the strengthened specimens are expected to be concentrated mainly at the link element. The cross section, the dimension and the length of link element, the two different reinforced arrangements and the additional vertical loading placed at the columns (or not) are the parameters under investigation. Fifteen specimens, scaled 1:3, were tested which consists of the bare frame (F1) and frames with four different vertical steel strengthened link element type. The first link (F2) is a rectangular cross section (70Χ6)mm, 100mm length. The second link (F3), is a steel element that has a symmetrical I cross-section with total section height d = 60 mm, flange width b = 30 mm, flange and web thickness t = 6 mm and length l = 100 mm. The third link (F4), has a symmetrical I cross-section with total section height d = 80 mm, flange width b = 40 mm, flange and web thickness t = 6 mm and length l = 200 mm. And the last link (F5) has a symmetrical I cross-section with total section height d = 120 mm, flange width b = 60 mm, flange and web thickness t = 6 mm and length l = 200 mm. All specimens were tested with and without additional vertical loading placed at the columns. The horizontal loads were imposed in a displacement control mode. After comparing the behaviour of the specimens under study, it can be concluded that the use of the steel link elements can increase considerably the strength, the stiffness, but mainly the energy dissipation capacity of the frame. In specimen F2 the load carrying capacity is three times higher than that of the reference specimen F1. Specimen F3 reveals an even better behaviour compared to F2. The significant improvement for the F4 strengthened frame is its increased ductility. In specimen F5, due to the high stiffness of the link, extended damage developed at the middle of the beam. It is evident that the existence of axial loads at the columns resulted to an increase of the strength, stiffness and dissipated energy for all the frames studied.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Karalis, Apostolos
  • Καραλής, Απόστολος

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/30367

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Karalis, Apostolos; Καραλής, Απόστολος. Πειραματική διερεύνηση της συμπεριφοράς πλαισίων οπλισμένου σκυροδέματος ενισχυμένων με χαλύβδινους συνδέσμους υψηλής απόσβεσης. Aristotle University Of Thessaloniki (AUTH), 2011. http://hdl.handle.net/10442/hedi/30367