Aristotle University Of Thessaloniki (AUTH)
Μελέτη αξιοποίησης ξύλου μικρών διαστάσεων για παραγωγή προϊόντων ξυλείας εσωτερικών χώρων με συγκόλληση
Abstract
dc:descriptionIn this PhD thesis, the possibility of small wood dimension utilization with gluing was investigated in order to use them for furniture and other interior constructions. The wood that is used was: beech (Fagus sylvatica), oak (Quercus petraea) and alder (Alnus glutinosa). For the adhesion of sawn wood which become from roundwood of the above mentioned species four different types of polyvinyl adhesives (D1, D2, D3 and one aliphatic) were used. More specific, the quality of adhesion of the different wood species, the possibility of gluing different wood species (beech with alder), the influence of temperature (40 οC and 60 οC) and relative humidity (a change to moisture content from 9,5 to 4,7%) in shear strength of glued products as also the influence of 2.000 repeats of 3.000N load in shear strength in normal conditions and in temperature of 40 οC and 60 οC, was studied.From the results of this research from the three wood species was assumed: a) In normal conditions, adhesion of alder was “excellent” with all four different adhesives, in beech wood adhesion was “excellent “ with D3 and aliphatic adhesive, while in oak wood adhesion was “very good” only with D3 adhesive. b) Influence of temperature of 40 οC and 60 οC for six hours and six days did not have any influence on shear strength of glued specimens when a reconditioning of specimens in normal conditions was followed for twenty four hours before the testing. c) A change of moisture content from 9-10% to 4,5-4,7% did not influence the strength of glued specimens (alder and beech). d) Influence of temperature in shear strength of glued specimens was significant when testing was taking place right after the treatment in temperatures of 40 οC and 60 οC for 6 hours and six days. Comparing adhesives, higher values at temperatures of 40 οC in all wood species was shown by aliphatic adhesive. At temperature of 60 οC all adhesives give us very low values of strength. e) Influence of 2.000 cycle loads (fatigue test) with 3.000Ν did not influence the glued specimens strength (beech and alder) with all the four different adhesives, when all the tests taking place in normal conditions. f) The treatment of glued specimens under the 2.000 cycling loads with 3.000Ν with simultaneous effect of temperature of 40 οC and 60 οC had important effect in bond strength, while at 60 οC temperature all the adhesives collapsed before the completion of 2.000 cycles and at temperature of 40 οC, maintenance of strength was observed only in glued with aliphatic adhesive specimens and in lower degree in glued with D3 adhesive specimens. g) Adhesion of different species (alder with beech) is feasible with “excellent” adhesive bonds in normal conditions of relative humidity and temperature.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Σιδεράς, Αδαμάντιος
Subjects
dc:subject × 23- Ξυλεία μικρών διαστάσεων
- Οξυά
- Δρυς
- Σκλήθρο
- Συγκόλληση ξύλου
- Αντοχή σε διάτμηση
- Αλειφατική
- Αντοχή σε θερμοκρασία
- Δοκιμές κόπωσης
- Small dimension wood
- Facus sylvatica
- Quercus petraea
- Alnus glutinosa
- Wood bonding
- Shear strength
- PVAc
- Aliphatic resin
- Thermal stability
- Fatigue test
- Γεωπονικές Επιστήμες και Κτηνιατρική
- Γεωπονία, Δασολογία και Αλιεία
- Agricultural and Veterinary Sciences
- Agriculture, Forestry and Fisheries
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/30386