Aristotle University Of Thessaloniki (AUTH)
Εναλλακτική καταλυτική διεργασία παραγωγής προπυλενογλυκόλης μέσω αξιοποίησης του παραπροϊόντος ρεύματος του βιοντήζελ
Abstract
dc:descriptionThe 20th century was characterized as the century of rapid population growth and living standards, accompanied by a corresponding increase in energy production and consumption. Biomass has the potential to cover a portion of the energy needs contributing to sustainable development and renewable energy concept. Concerning the transportation sector, the most important biofuel produced in the European Union is biodiesel. The main disadvantage of biodiesel compared to petroleum diesel is its higher production cost. The effective utilization of glycerol, resulting as a byproduct of biodiesel plants is crucial to the viability, profitability and environmental identity of biodiesel.The alternative production of chemicals that are conventionally formed based on petroleum resources using glycerol as a feedstock, is an important approach towards utilization of this by-product. The catalytic reaction of glycerol hydrodeoxygenation (removal of one oxygen of glycerol in the presence of hydrogen) leads to the formation of propylene glycol, a value added chemical. Propylene glycol, a product with a wide range of applications, is conventionally produced by the hydration of propylene oxide. The proposed alternative method for the production of propylene glycol via glycerol hydrodeoxygenation (otherwise called hydrogenolysis) offers significant advantages, such as reducing dependency on fossil fuels and total production cost of biodiesel.The key for a viable industrial application of this process is the development of an effective catalyst presenting high propylene glycol yield and stability. Moreover, another important parameter is the improvement of the process, in order to run in the absence of external hydrogen addition and thus become more competitive compared to the conventional industrial method. The above were the objectives of this thesis.Several catalytic systems, highly efficient for the production of propylene glycol via glycerol hydrogenolysis were developed and studied. Detailed investigation of structural and physicochemical properties of the materials in combination with their catalytic performance, provided important information about the nature of the active and selective sites. The main part of the research was focused on two types of catalytic materials: ruthenium and copper-based catalysts.The experiments were carried out in a batch reactor under 8MPa hydrogen pressure and 240oC. Supported ruthenium catalysts (5wt%) constitute a highly active and selective class of materials for the glycerol hydrogenolysis reaction. The type of support (SiO2, Al2O3, ZrO2) and the metal precursor (nitrate and chloride salts) were recognized as the two crucial parameters affecting both the structure and the catalytic behavior of the materials. Theseparameters contribute to the total acidity of the catalysts as well as the morphology of the ruthenium metal particles. The above bi-functional activity (metal+acidity) is essential for a catalyst in order to be effective for this reaction. The increased acidity leads to increased activity, but it also promotes the successive hydrogenolysis of propylene glycol thus reducing its selectivity. The most selective catalyst proved to be the Ru/SiO2 (precursor RuNO(NO3)3) achieving 65% selectivity at 20% glycerol conversion, high propylene glycol productivity equal to 2.8gPG..gcat.-1.h-1 and stable behavior. Experiments with the reactive intermediate (acetol) and final products (propylene glycol, 1,3-propanediol, ethylene glycol) were performed in order to identify the main steps of the mechanism. It was confirmed that both diols 1,2- and 1,3- do not undergo sequential reactions over the conditions used, while acetol was completely hydrogenated to 1,2-propanediol. This conclusion provides strong evidence for the two-step mechanism consisting of initial glycerol dehydration to acetol and subsequent fast hydrogenation of the latter to propylene glycol. Furthermore, it was confirmed that ethylene glycol is formed via direct cleavage of C-C glycerol bonds rather than through sequential reactions of the products.The constrains on the selectivity of ruthenium-based materials led to the investigation of catalysts based on copper. Copper catalysts with metal loading varying between 5-20wt% were prepared using the wet and dry impregnation methods. The supports used were commercial SiO2 and Silica gel and synthesized HMS, SBA-15, SBA-900oC. The results demonstrate that the silica supported copper catalysts studied are the most promising catalytic systems for the selective formation of propylene glycol via glycerol hydrogenolysis. Copper, a low-cost metal, appears effective for the activation and the selective conversion of glycerol to propylene glycol, offering significantly higher yields compared to ruthenium catalysts. The most important characteristic of the supported copper catalysts is that they present high propylene glycol selectivity >90%, as copper metal does not favor C-C bond scission and therefore limits the formation of ethylene glycol and gaseous products. Deactivation, which is the major disadvantage of copper catalysts, was addressed by the use of stable silica supports (silica gel, SBA900C). The best performing catalyst, 18Cu/Silica gel (air flow calcined) proved highly effective, obtaining high productivity of the desired product, 14.9 gPG..gcat.-1.h-1, which is 4.5 times greater than the highest value reported in literature in similar operating conditions.The effect of the operating conditions in the presence of the 18Cu/Silica gel (air flow calcined) catalyst showed the parameters that result in higher propylene glycol yield. Based on the evaluation of the impact of operating conditions on conversion and selectivity, asimple kinetic scheme was proposed, which involves two parallel reactions of glycerol to 1.2- and 1,3-propanediol formation and the reaction orders, with respect to glycerol and hydrogen were estimated. The difference in activation energies for the two parallel reactions (90.2 kJ/mol for propylene glycol and 131.3 kJ/mol for 1,3-propanediol) indicates the selective formation of the former at lower temperatures.In an effort to improve the process we for the first time invented a new innovative method for propylene glycol formation. This new method demonstrated the possibility of formation of propylene glycol under inert atmosphere, using the crude glycerol stream, after the transesterification process. The required hydrogen is produced in situ by the reformation of methanol, already present in the feed stream and subsequently consumed for the hydrogenolysis of glycerol. For this purpose two types of catalysts were studied, platinum and copper catalysts. The platinum based catalysts were proved active for the combined reaction cycle. Moreover, the study of the operating conditions showed the optimum parameters for obtaining high propylene glycol yield. The copper catalysts studied proved highly efficient materials for the combined reaction cycle. Diagnostic tests showed that the H2 required for glycerol hydrogenolysis, is mainly formed through methanol steam reforming, while glycerol reforming does not significantly participate. The synthesis method of Cu-Zn-Al catalysts affects their performance and it was observed that high active copper surface area favors both reactions (methanol reforming – glycerol hydrogenolysis). The study of the operating conditions led to the conclusion that maximum propylene glycol yield is observed at short reaction times, high ratio catalyst/feedstock and under system pressure. The latter is necessary for conducting the reaction in the liquid phase. The catalyst Cu-Zn-Al with Cu loading 46wt% prepared by the oxalate gel co-precipitation method resulted in 42.5% propylene glycol yield at 1h reaction time, ratio catalyst/feedstock 0.24 and initial pressure 3.5MPa N2.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Vasiliadou, Efterpi
- Βασιλειάδου, Ευτέρπη
Subjects
dc:subject × 20- Παραγωγή προπυλενογλυκόλης
- Αξιοποίηση γλυκερόλης
- Αντίδραση υδροαποξυγόνωσης
- Καταλύτες ρουθηνίου
- Καταλύτες χαλκού
- Κινητική μελέτη
- Επιτόπου παραγωγή υδρογόνου
- Συνδυασμένος κύκλος αντιδράσεων
- Propylene glycol production
- Glycerol utilization
- Hydrodeoxygenation reaction
- Ruthenium catalysts
- Copper catalysts
- Kinetic study
- In-situ hydrogen formation
- Combined reaction cycle
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/30462