Aristotle University Of Thessaloniki (AUTH)
Ανάπτυξη ινωδών και πορωδών νανοσύνθετων πολυμερικών υλικών
Abstract
dc:descriptionThe present dissertation is focused on the development of microfibrous and microcellular polymer/clay nanocomposites. Understanding the parameters affecting the structure and properties of nanocomposite material is of fundamental importance in designing micro-fibrous and cellular nanocomposites with desired properties. For this reason, the modification of sodium montmorillonite (NaMMT) has been initially studied applying two different ion-exchange methods for the insertion of various alkylammonium cations into the clay’s interlayer spaces. Clays were organically modified by the classic method of ion-exchange and were subsequently compared regarding their structure with those modified by a new ion-exchange technique in supercritical carbon dioxide (scCO₂) environment. These modified clays were used for the preparation of nanocomposites from 3 different matrices: poly(butylene succinate-co-butylene adipate) (known as bionolle) (PBSA), poly(D,L lactic acid) (PDLLA) and poly(ε-caprolactone) (PCL). After examination of the nanocomposite morphology, the polymer - clay interaction in the nanocomposite was related to the ion-exchange process that was followed for the clay modification. Following, electrospinning was conducted for the fabrication of fibrous mats from PBSA nanocomposites. For the investigation of the influencing parameters involved, a design of experiments (DoE) was employed. The morphology of the nanofibrous non-woven mats was studied in order to define the material and process parameter settings capable of giving the targeted nanofibrous structure of the mats. Screening experiments upon a DoE in electrospinning of PBSA/clay nanocomposites were initially carried out to reveal the single and mutual effects of the related process and material parameters on the fibrous morphology in order to identify only the statistically important ones. Subsequently, the parameter space was narrowed down with solution concentration and clay loading as the two base factors in a new full factorial optimization design. Prediction capability for the process domain was managed by the two model equations derived, each describing the average fiber diameter and diameter distribution. With the help of the two response surfaces generated, the “sweet - spot” region was detected where fibers with average diameters in the nanoscale and narrow distributions can be obtained. The thermal behaviour of the nanocomposites was also studied before and after electrospinning. A multi-analyte platform is provided by the combination of response surface methodology (RSM) results for improving the nanofibrous quality and post-spinning characterization for predicting the overall performance of the electrospun web. In the next stage of this project, porous structures of PDLLA/clay nanocomposites were prepared by isothermal pressure quench using supercritical CO₂ as foaming agent. The objective here was to reveal the role of 3 parameters related to the organo-modified clay on the final cellular structure: (a) the organic cation concentration of the surfactant (% cation exchange capacity - %CEC), (b) the type of alkylammonium surfactant used for the clay modification (in terms of carbon-chain length), and (c) the clay loading in the nanocomposite. The results suggested that all 3 parameters have an impact on the morphological characteristics of the porous structures (average pore diameter, cell density and bulk foam density). Finally, scCO₂ was used for the development of PCL/clay nanocomposites which were obtained as porous materials by two different techniques. A one-step method is introduced where the polymer and the clay are placed in a high pressure vessel and are saturated with a gas or supercritical fluid (CO₂-ethanol mixtures in our case) at constant temperature and pressure and vigorous stirring. This way the supercritical fluid is helping the clay dispersion into the polymer matrix. Then, the system is quenched in supersaturated state either by reducing pressure (or by increasing temperature) resulting in the nucleation and growth of pores-cells inside the polymer matrix. In the one-step process the blowing agent plays also the role of the dispersion medium for porous polymer/clay nanocomposite preparation. This fabrication route was compared with the conventional two-step nanocomposite foaming process. The latter would include the preparation of the nanocomposite first (by solution or melt blending) and the foaming subsequently by pressure quench. The two methods are compared and evaluated.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tsimpliaraki, Athanasia
- Τσιμπλιαράκη, Αθανασία
Subjects
dc:subject × 18Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/30463