Back to search

University of Patras

Βέλτιστος σχεδιασμός του αντιστροφέα ρεύματος flyback για εφαρμογή του σε φωτοβολταϊκά πλαίσια εναλλασσόμενου ρεύματος.

Abstract

dc:description

This thesis pertains to domestic on-grid PV systems that utilize the AC-PV Modulestechnology. These low power PV topologies (up to 300W) are implemented by integratingone PV Module and a single phase inverter (one or multi stage), in one independent electronicapparatus. For this reason they are called Module Integrated Converters (MIC). The mostimportant requirements for these systems are the higher possible efficiency - in order to takeadvantage of the supplied solar energy – and the pure sinusoidal output current.The main purpose of this thesis is to contribute to the field of the dispersed PV powergeneration. Thus, it focuses on the thorough analysis, the behaviour optimization, thecomponents losses estimation, the parameterization and finally the optimal design of Flybackcurrent source inverter (Flyback CSI).The main objectives fulfilled in this thesis are: The detailed analysis of the inverter behaviour for two different semiconductor controlstrategies. The precise losses calculation of all the components of the Flyback CSI. The optimal design of the Flyback CSI, which is based on maximizing the weightedefficiency. The implementation of the semiconductor control via a digital microcontroller,eliminating the existing analogue control.Initially, the study focuses on a first control technique that forces the inverter to functionin Discontinuous Conduction Mode (DCM). On the other hand, a second control techniquethat forces the inverter to function on the Boundary between Continuous and DiscontinuousMode (BCM) is proposed. This new control technique is named i-BCM (improved BCM) andit is an improved version of the BCM control technique found in the literature. This newcontrol scheme significantly improves the power factor of the inverter output. The inverterinjects pure sinusoidal current to the grid.The two different control strategies form different circuit conditions. Analyticalexpressions for the average and the rms value of the current, flowing through the components(semiconductors, transformers e.t.c), for both cases are developed. In addition, new operatingboundaries of the semiconductors for the safe operation of the inverter based on the analysisof the voltage and current that stresses the semiconductors, are proposed. Special attention is given on the calculation of the voltage deviation on the output filter capacitor. This voltagedeviation is caused by the switching operation of the inverter and affects the selection of thesemiconductors and the voltage level that can handle.Furthermore, the conduction losses and the switching losses of the semiconductors aredetermined through analytical, mathematical equations. Because of the inverter highswitching frequency, the transformer losses (copper and core), are calculated with specialattention to detail. For this reason, an in depth examination of the existing literature takesplace that leads to the selection of the appropriate core and copper loss models. The modelsare adequately adjusted to the circuit conditions of the Flyback inverter topology.The system is parameterized along with the losses analysis. All the equations aremanipulated in such a way that simplifies the determination of all the variables and all theconstants of the inverter and the loss dependent parameters. Consequently, special emphasis isgiven to the manipulation of the analytical equations, without affecting the accuracy, in orderto express the losses using the minimum number of independent variables. Therefore, thestudy is complete but the complexity is eliminated and the independent design variables areonly four.The optimization problem is the maximization of the weighted efficiency. The optimaldesign of the Flyback CSI is implemented based on this formulation. As a next step, theobjective (or cost) function, the design variables and constants, the constraints and their rangeneed to be defined. The weighted efficiency is the objective function whereas the input andthe output specifications of the inverter are the design constants. After an extensive literatureresearch, a stochastic optimization method is chosen as the most appropriate to determine thevalues of the four design variables in order to achieve the highest weighted efficiency. A newiterative algorithm, which uses the losses equations, is developed to achieve the optimaldesign of the Flyback CSI for both control strategies.Moreover, the control of the inverter is implemented via a digital microcontroller,eliminating the existing analogue control. This changes the way of controlling the inverter andoffers flexibility and limitless possibilities in implementing and adopting various controlstrategies. Specifically, under the i-BCM control scheme, the need for measuring the currentof the transformer windings is eliminated by using an appropriate algorithm. Themicrocontroller used in this research is dspic30F4011 developed by Microchip. Its goodcomputational capacity and the variety of peripherals enable the automation of some functions such as connection and disconnection from the grid and the integration of the maximumpower point tracking (M.P.P.T.) on the same digital unit.Finally, laboratory prototypes are implemented, based on the optimal parameterscalculated for every case, using the proposed optimization method. The experimentalprocedure confirmed the theoretical approximations. A high precision power analyser wasused. Furthermore, the beneficial effect of the combined use of the two control powertechniques on the power density is also studied.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Nanakos, Anastasios
  • Νανάκος, Αναστάσιος

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/30470

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Nanakos, Anastasios; Νανάκος, Αναστάσιος. Βέλτιστος σχεδιασμός του αντιστροφέα ρεύματος flyback για εφαρμογή του σε φωτοβολταϊκά πλαίσια εναλλασσόμενου ρεύματος.. University of Patras, 2012. http://hdl.handle.net/10442/hedi/30470