Back to search

University of Patras

Μελέτη στηριζόμενων σε δυαδικά υποστρώματα καταλυτών για την παραγωγή αερίου σύνθεσης από την καταλυτική αναμόρφωση του φυσικού αερίου με διοξείδιο του άνθρακα

Abstract

dc:description

The CO2 reforming of CH4 (Dry Reforming of Methane, DRM) to synthesis gas constitutes an attractive process as two continuously produced and thus abundant and inexpensive, but also environmentally harmful, compounds are exploited for the production of a high value chemical product. Combined with the WGS reaction, DRM may be applied to form H2, whose production from abundant sources in an economical way would help commercialize fuel cell-powered systems. Furthermore, as DRM has a large heat of reaction and is reversible, it has potential thermochemical heat-pipe applications for the recovery, storage, and transmission of energy from solar and other renewable sources in chemical energy storage and transmission systems (CETS). However, the large scale industrial application of this process is presently hindered by the formation and deposition on the catalyst of large quantities of carbonaceous deposits (coke). Although noble metal–based catalysts are less prone to coke formation, their high cost prohibits their industrial use and the current research has focused on the improvement of the state of the art Ni/Al2O3 catalyst.This improvement can be achieved with the use of appropriate supports and modifiers that increase the availability of surface oxygen species, which can enhance the adsorption and dissociation of CO2. CeO2-Al2O3 and CeO2-ZrO2-Al2O3 are that kind of supports, which have been studied in the frame of the present study.The lack of any research activity, dealing with the study of the effect of the Ni/CeO2-Al2O3 catalysts` preparation methods on their behavior for the DRM, has lead us to set up the first objective of this thesis that is the investigation of the preparation method`s effect of the mixed supports CeO2(5%κ.β.)-Al2O3 on the physicochemical properties and catalytic behavior (activity, carbon deposition and stability) of the Ni(10%κ.β.)/CeO2-Al2O3. For this purpose binary CeO2(5%κ.β.)-Al2O3 supports were prepared with four different methods: wet impregnation (WI), deposition-precipitation (DP), deposition-precipitation in the presence of citrate (DP+c) and co-precipitation (CP). The deposition of the NiO phase (10wt.% Ni) on the above, but also on all examined supports, was realized via wet impregnation. The catalysts and the supports were studied with the techniques BET, DRS, TPR, ΤΕΜ and XRD in their oxidized, reduced and in their used state. They have been subjected under DRM reaction conditions at 700˚C for 24h. The catalysts, whose supports were prepared with the DP, CP methods and the non-modified one, were also operated also for 96h in total, remaining for 24h continuously and successively at the below reaction temperatures: 800C, 700C, 600C and once again at 800C. Carbon deposits were determined with the TPH technique.The results from the Ni/CeO2(5%κ.β.)-Al2O3 study showed that the incorporation of CeO2 with the techniques WI, DP and DP+c leads to a limited increase in the catalytic activity of Ni/Al2O3, improving the dispersion of metallic Ni0 and enhancing the reducibility of the Ni2+ oxide phase. Higher improvement of the catalytic activity is achieved with Ni/CeO2(CP)-Al2O3. For this sample, the influence of CeO2 can not be placed in the above framework. NiO species that interact with ceria, by creating an interfacial region or even a stable structure can possibly be responsible for the increased activity of this catalyst.The effect of CeO2 proved to be more important regarding the formation of carbon deposits. The deposition-precipitation method in the presence, but mainly in the absence of citric acid, was accompanied with a remarkable reduction of deposited C by 70%, both in the case of DRM reaction conditions for 24h at 700˚C and after the cycle of 96h. The optimum resistance in coke of the DP-catalyst is attributed to the highest dispersion of Ni0 and to the presence of the CeO2, similarly with high dispersion and with high mobility of lattice oxygen. On the contrary, the worst dispersion of Ni0 that is characteristic for the more active CP-catalyst renders it the worst sample in terms of carbon deposition, which is responsible for the deactivation that is induced during the 24h reaction at 600˚C.The best performance of the Ni/CeO2(5%κ.β.)-Al2O3(DP) catalyst in terms of C deposition, but also as it concerns the molar ration of products to the deposited carbon for the total reaction period [(Η2+CO)/C], lead to the specification of the second objective of the presented study, which is the investigation of the effect of the CeO2 loading on the catalytic behavior of Ni(10%κ.β.)/CeO2(DP)-Al2O3. The selected wt.% CeO2 loadings were 0.05, 1, 5 and 10. It has been concluded that the addition of CeO2 in the above loading region does not alter significantly the activity of the Ni/Al2O3 catalyst, causing a small enhancement mainly for 1–5wt.% CeO2 loading.The effect of the CeO2 loading has been considered as remarkable concerning the carbon deposition on the surface of the Ni/CeO2(DP)-Al2O3. All the modified catalysts presented significantly decreased carbon deposits, where the reduction rate gradually increased by increasing the CeO2 composition from 0 up to 5wt.%, while it reduced for the sample with the highest ceria loading, 10wt.%. This positive effect of CeO2, at least in the region 0.05–5wt.%, seems to be closely related to the increase of the metallic Ni0 dispersion, since its size reduces gradually from 8.3nm to 4.8nm going from Ni/Al2O3 to Ni/CeO2(5%κ.β.)-Al2O3, while the size increases to 10nm for the Ni/CeO2(10%κ.β.)-Al2O3. On the other hand, the presence of CeO2 with the provision of lattice oxygen with high mobility is, also, responsible for the advantageous behavior of all the modified catalysts concerning the carbon deposition. The optimum behavior of the Ni/CeO2(5%κ.β.)-Al2O3 catalyst is the result of a combination between adequate loading of CeO2 with a satisfactory dispersion.Based on increasing proofs, reported in literature, for the improved behavior of the mixed oxides CeO2-ZrO2 versus CeO2, in terms of the oxygen/storage capacity (OSC) and thermal stability, the final objective of this thesis was set. This was an effort to reinforce the CeO2(5%κ.β.)-Al2O3 system with the addition of ZrO2. For this purpose two supports of Ce0.8Ζr0.2O2(5,89%κ.β.)−Al2O3, were prepared with deposition-coprecipitation from nitrates (DCP) and citric precursor salts (DCP+c). Moreover, the preparation in the presence of citric acid was chosen for investigating the effect of ZrO2 loading, which varied in the region 0.89–14.38wt.%, corresponding to Ce/Zr atomic ratios equal to 4, 1 and 1/4. Testing at 700˚C for the CO2 reforming of CH4 revealed the Ni/Ce0.8Zr0.2(5,89%κ.β.)O2−Al2O3(DCP+c) as the most active and resistant to coke catalyst of this series, possibly due to the better formation of adsorbed oxygen species, which results from the appropriate atomic Ce/Zr ratio and the high dispersion of the Ce1-xZrxO2 (0≤x≤1) phase. It has also to be mentioned that this catalyst shows increased CH4 and CO2 conversions by 14% and 9%, respectively and improved selectivity to H2 in comparison to the Ni/CeO2(5%κ.β.)−Al2O3(DP) catalyst, while it shows 43% decreased carbon deposits compared to the Ni/Al2O3.Despite the good behavior of the Ni/Ce0.8Zr0.2(5,89%κ.β.)O2−Al2O3(DCP+c) catalyst, the Ni/CeO2(5%κ.β.)−Αl2O3(DP) remains the best sample. It has the advantage of coke resistance, as a result of the higher Ni0 dispersion, and in total, since the calculated molar ratio of the reaction products to the deposited carbon for the sum of 24h reaction [(Η2+CO)/C] is almost the double compared to that calculated for the Ni/Ce0.8Zr0.2(5,89%κ.β.)O2−Al2O3(DCP+c) catalyst.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kollia, Maria
  • Κόλλια, Μαρία

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/30523

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kollia, Maria; Κόλλια, Μαρία. Μελέτη στηριζόμενων σε δυαδικά υποστρώματα καταλυτών για την παραγωγή αερίου σύνθεσης από την καταλυτική αναμόρφωση του φυσικού αερίου με διοξείδιο του άνθρακα. University of Patras, 2012. http://hdl.handle.net/10442/hedi/30523