National Technical University of Athens (NTUA)
Σχέση μικροδομής-ιδιοτήτων σε χάλυβες TRIP (Transformation Induced Plasticity) αυξημένης πλαστικότητας κατά την παραμόρφωση
Abstract
dc:descriptionThe requirements of the automobile industry for weight reduction and increase formability contributed to the development of TRIP steels, a class of steels combining a good balance of strength and ductility and a high energy absorption potential. These excellent properties are due to a fine complex microstructure consisting of ferrite, lamellae bainite, retained austenite and a small percentage of martensite. The effect of microstructure at the final mechanical properties was the purpose of this study. To achieve this, three basic objects were determined. The first object was to validate, refine and develop the experimental techniques necessary for the characterization of the TRIP steels. The second object was to study the reactions taking place at the isothermal bainitic holding, examine the factors that affect them and combine them with the final mechanical properties. Last, due to the third object we made an effort to produce in laboratory a steel with the same properties as the industrial. For the attainment of these objects Light Optical Microscopy (LOM), Scanning Electron Microscopy (SEM), Electron Backscatter Diffraction (EBSD), X-Ray Diffraction (XRD) and Superconducting Quantum Interference Device (SQUID) techniques were used. For the investigation of the mechanical properties hardness measurements were made. The SEM techniques were necessary for these types of steels. A discussion of the data from magnetization measurements suggests that magnetization measurements lead to more reliable results than XRD measurements. EBSD technique proved to be a useful tool for the metallurgists combining crystallographic charecteristics with other characteristics of the grains of the material. The results showed that increase of intercritical annealing temperature increases the volume fraction of intercritical austenite and make them more stable. Increase of the isothermal bainitic temperature increases the speed of bainite reaction. By increasing the time of the bainitic holding the volume fraction of the retained austenite first increased for short periods and after decreased for longer periods of holding times. It was proved that through certain heat treatment we can produce experimental steel with same characteristics as the industrial one. Finally, it’s the first time in Greece that this technique is used for the characterization of a steel. So this study can become a basis for the future characterization of the steels and other crystalline materials.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kokkonidis, Panagiotis
- Κοκκωνίδης, Παναγιώτης
Subjects
dc:subject × 22- Χάλυβες αυξημένης πλαστικότητας κατά την παραμόρφωση
- Χάλυβες αυτοκινητοβιομηχανίας
- Μικροδομή
- Ηλεκτρονική μικροσκοπία
- Τεχνική περίθλασης οπισθοσκεδαζόμενων ηλεκτρονίων
- Μαγνητικές μετρήσεις
- Μπαινιτικός μετασχηματισμός
- Υπολειπόμενος ωστενίτης
- Transformation induced plasticity (TRIP) steels
- Automobile steels
- Microstructure
- Scanning electron microscopy (SEM) technique
- Electron backscatter diffraction (EBSD) technique
- Magnetic measurements
- Bainite transformation
- Retained austenite
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική Υλικών
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Engineering and Technology
- Materials Engineering
- Other Engineering and Technologies
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/30529