Back to search

Aristotle University Of Thessaloniki (AUTH)

Measurement of the thermal conductivity of composite solid materials

Abstract

dc:description

The scope of the present work was the performance of very low uncertaintymeasurements of the thermal conductivity of solid and composite materials to beemployed in thermal conductivity reference correlations. The technique employedfor the measurements is the transient hot–wire method, which is established as anaccurate absolute technique for thermal conductivity measurements of solids. A newexperimental device was designed and several refinements were made in relation tothe already existing one. More specifically, a new silicone paste, of higher thermalconductivity was used in the sensor and two stainless steel–spacers were employedto define exactly the distance between the solid specimens that were beingmeasured. Moreover, Comsol Multiphysics finite element software was employed toaccurately describe the geometry of the sensor and reproduce the temporaltemperature rise of the hot wire from the beginning of the time scale. Therefinements applied to the hot–wire instrument allowed the thermal conductivitymeasurement of solids with an uncertainty better than 1%. Τhe developed transienthot wire sensor was employed for the measurement of the thermal conductivity ofthe reference materials Pyroceram 9606 and Pyrex 7740 over a temperature rangefrom 315 K to 440 K. The sensor was also used for studying candidate referencematerials for thermal conductivity, Polymethyl Methacrylate (PMMA) andBorosilicate Crown Glass (BK7). The acquired thermal conductivity values werecompared with the data of other investigators and in all cases the deviations werewithin mutual uncertainty of the measurements. Subsequently, the hot wire sensorwas used for measuring the enhancement of the thermal conductivity of an epoxy–resin reinforced initially with plies of plain weave glass fabric, then by carbon multi–walled nanotubes (C–MWNT), and finally with both these two reinforcements athand. The uncertainty of the measurement increases to 2% due to inhomogeneitiesin the samples preparation. Results reveal that for the epoxy reinforced with glassfibres, with volume fraction of 28%, the thermal conductivity increase was 27%compared to plain epoxy resin. When reinforced with C–MWNTs the maximumenhancement observed was about 20% at a concentration of 1.2% by weight of C–MWNT. Similarly, when reinforced with both the C–MWNTs and glass fibres themaximum thermal conductivity enhancement observed was about 60% at aconcentration of 1.2% by weight of C–MWNTs.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Antoniadis, Konstantinos
  • Αντωνιάδης, Κωνσταντίνος

Subjects

dc:subject × 12

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/30572

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Antoniadis, Konstantinos; Αντωνιάδης, Κωνσταντίνος. Measurement of the thermal conductivity of composite solid materials. Aristotle University Of Thessaloniki (AUTH), 2011. http://hdl.handle.net/10442/hedi/30572