Back to search

University of Western Macedonia

Μέθοδοι αποθήκευσης υδρογόνου σε προηγμένα υλικά

Abstract

dc:description

Environmental problems related to the emission of greenhouse gases in conjunctionwith the depletion of fossil-fuel natural resources, have led to intensive research onalternative, environmentally friendly, fuels. The simultaneous growth of the worldpopulation and air-pollutant emissions produced by conventional fuels, impose theirreplacement by cleaner fuels such as hydrogen.In the present thesis was studied the storage of hydrogen in advanced materials. Theresearch was focused in the composition and characterization of metal hydrides ofstructure ΑΒ2 and more specific in Zr-based materials. The purpose of this research wasfocused in the development of suitable compounds capable to absorb/desorb largequantity of hydrogen for portable applications.In the first chapter which is the introduction chapter, the environmental problem thatexists because of the increased gas emissions of pollutants and the need for turn in softand renewable forms of energy, is mentioned.In chapter two are reported the general characteristics of hydrogen, the natural andchemical properties, while in the third chapter are determined the methods of hydrogenstorage and the materials that are used until today in order to achieve storage.In chapter four, the characteristics of crystals and crystal systems are described, themain structures of Intermetallic compounds for hydrogen storage, whereas internationalbibliography is reported for what it has been studied until now in the particularmaterials.In the fifth chapter are reported the main characteristics of metal hydrides, theirthermophysics properties, the crystal structures as well as the parameters that are takeninto consideration for their creation. Extensive report becomes also for the systems ofmetal hydrides that have been developed until today.Chapter seven and eight, are describing the techniques that were used for thecharacterization of intermetallic compounds and the methods that were followed in orderto determine the pressure/composition isotherms of hydrogen, are reported.In the eighth chapter, we continued to the experimental part, where the preparation ofthe samples and the results of characterization and their analysis are presented. Westudied the compounds with stoichiometry Zr1-xTixCr2-y-zVyNiz where x=0, 0.1 and 0.2,y,z =0.4 and 0.8. Rietveld analysis of X-ray diffraction diagrams showed that thismaterials follow a multiphase system, with main structures the hexagonal Laves phase(C14) and cubic Laves phase (C15). Scanning electron microscopy was also used for the determination of microstructure. The results from this study also came in absoluteagreement with xrd results where C14 constitutes the main phase and is presented withgrey colour while other phases are distinguished with various gradations of grey.After the characterization of the materials with the methods reported above, next stepwas the study of hydrogen absorption/desorption capacity in ambient pressure andtemperature, with two methods, volumetric and gravimetric. In the volumetric method,the samples initial were activated in the 150oC in order to remove impurities and oxidesand release the interstitial sites occupied by hydrogen. Pressure/composition curveswere measured in room temperature. The samples with the larger amount of hydrogencapacity where the ones with stoichiometry Zr0.9Ti0.1Cr0.8V0.8Ni0.4 andZr0.8Ti0.2Cr0.8V0.8Ni0.4, resulted 1.25 wt% and 1.16 wt%, respectively.Due to the particular morphology and high storage capacity, the compound withstoichiometry Zr0.9Ti0.1Cr0.8V0.8Ni0.4 was further more studied with the method ScanningTunelling Microscopy (STM) and the gravimetric method, respectively. The results ofmicroscope analysis showed the existence of round agglomerates with diameter 5 nmand the existence of boundaries between two big domains. The pressure/compositionmeasurement with the gravimetric method showed that in room temperature can beachieved high absorption capacity of 4 wt% while reversible can desorb almost 2.3 wt%.Finally, in order to study the application of materials in real magnitude, a tankwas used, where in temperature 25 oC and pressure 12 bar the sample absorbed almost328 litres of hydrogen while it desorbed 280 litres of hydrogen almost 1.1 wt% in120 min.In chapter nine, are reported applications that use metal hydrides as means ofhydrogen storage in the space industry.In the tenth chapter, where this thesis is completed, the conclusions of this study arepresented. The results showed that with the essential substitutions in the particularstructure of AB2 intermetallic compounds, while also decreasing the cost of materialsthat were used, suitable stoichiometries can be created with high hydrogen storagecapacity in ambient temperature and can be used in large-scale applications.

Degree

thesis:*
Grantor dc:publisher
University of Western Macedonia
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Ioannidou, Alexandra
  • Ιωαννίδου, Αλεξάνδρα

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/31557

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Ioannidou, Alexandra; Ιωαννίδου, Αλεξάνδρα. Μέθοδοι αποθήκευσης υδρογόνου σε προηγμένα υλικά. University of Western Macedonia, 2011. http://hdl.handle.net/10442/hedi/31557