University of Patras
Σύνθεση ζεολιθικών υμενίων στην επιφάνεια μαγνητοελαστικών ελασμάτων για την ανίχνευση πτητικών οργανικών ουσιών και τον προσδιορισμό της επίδρασης της ρόφησης στις μηχανικές ιδιότητες του υμενίου
Abstract
dc:descriptionIn the current thesis the development of sensors comprised of magnetoelastic ribbon(Metglas) its surface was coated with selective sensitizing layer was examined. In mostcases, zeolites were selected as sensitive layers. Different types of zeolites were synthesizedand bounded in both outer surfaces of Metglas using the hydrothermal synthesis technique.Such a sensor combines the adsorptive abilities of sensitizing layer with the inner ability ofMetglas to convert mass loadings and changes in the elastic properties in correspondingchanges of the measured resonance frequency of the ribbon. That combined ability has beenused for the detection of Volatile Organic Compounds (VOC’s). More particularly, for thesame purpose zeolite layers (FAU, MFI and LTA) and polymer (Bayhydrol-110) have beenused. The detected VOC’s are: ethyl-acetate, para-xylene, ortho-xylene, benzene, cyclohexane,n-hexane, propane and propylene. The second target of the current thesis was the calculation of mechanical properties ofzeolites. In the literature has been proved that gas adsorption upon zeolites affects not onlyits mass but also its mechanical properties through the unit cell changes. Thus, adsorption isexpected to affect applications such as zeolite membranes the performance of which isdirectly affected by their mechanical properties and possible changes. Hence, a new methodis proposed which unable the calculation the Young modulus of zeolite films, and thestresses/deformations induced in the zeolite film upon adsorption. The calculation of Youngmodulus is based on the recording of resonance frequency changes of multiple sensors withdifferent zeolite thickness each. The methodology is general and can be used for measuringYoung modulus of any microporous film as long as it can be deposited as uniform layer ona magnetoelastic ribbon.The calculation of adsorption induced stresses is succeeded with two differentmethods. The first method is applied in sensors in which zeolite coating existed on bothsurfaces of Metglas ribbon. Combined use of appropriate theory and mathematical modelfrom the literature for the magnetoelastic materials, stresses induced on FAU, LTA andsilicalite-1 zeolites upon humidity adsorption were calculated. The second method wasapplied in Metglas/MFI sensor in which uniform polycrystalline MFI layer existed onlyfrom the one side of the ribbon. The method was applied during the adsorption of VOC’sand is based on the bending and elasticity shown by the sensor during the adsorptionprocess. The differentiation of the two surfaces concerning the cohesion of the film,combined with adsorption phenomena cause remarkable bending, visible even with a nakedeye, from the magnitude of which stresses induced on zeolite film are calculated. In allcases there is a comparison of our experimental results with corresponding from theliterature.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2011
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Baimpos, Theodoros
- Μπάϊμπος, Θεόδωρος
Subjects
dc:subject × 16Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/31646