Technical University of Crete (TUC)
Συμβολή στη διερεύνηση των μηχανισμών γεωπολυμερισμού μεταλλουργικών αποβλήτων με έμφαση στις σκωρίες ηλεκτροκαμίνων
Abstract
dc:descriptionDevelopment of new environmentally friendly technologies is required in order to improve the management of mining and metallurgical wastes and to moderate various environmental impacts, as well as, to minimise the disposal cost. Geopolymerisation is an emerging technology that may contribute to the utilisation of various wastes and the development of new materials withadvanced properties. Geopolymer synthesis using low calcium ferronickel slag is a novel researchtopic. Limited research has been carried out, specifically in Australia, France and Ukraine. Most of these efforts involve utilization of alumino-silicate materials, fly ash or high calcium slags (>40%) in order to develop new products and immobilize hazardous elements. The present PhD thesis aims to investigate the mechanisms of the reactions taking place when geopolymers are synthesised from mining and metallurgical wastes, with emphasis on ferronickel slag. The effect of various factors is examined when slag-based geopolymers are subjected to compressive strength testing, in order to optimise synthesis conditions. The factors examined include the use of alkaline activating solutionof various concentrations; the addition of kaolinite, metakaolinite, pozzolan, CaO, fly ash from Megalopolis or Ptolemais thermal power stations, red mud and silica sand; the water content, the pre-curing time, the heating temperature and the heating and aging period. Each of the above-mentioned factors plays a decisive role in the compressive strength of the final products. The excess of Al and Si provided from the raw materials does not fully react during geopolymerisation and, therefore, results in decreased compressive strength. The addition of an activating solution using the optimum concentrations (about 8 Μ ΚΟΗ or 6 Μ NaOH and 8 % w/w Na2SiO3) improves strength substantially. Optimum water content improves workability of the paste and prevents the development of pores and cracks. However, in order to develop new materials with desired mechanical properties for specific applications, appropriate pre-curing (2 days), heating (80 oC for 48 hours) and aging time (28 days) should be considered. Structural stability and durability of geopolymers, as well as dissolution of hazardous components were studied by immersing them in various corrosive and acidic solutions. Slag-based geopolymers show a better behaviour compared with slag-kaolinite geopolymers. The strength of geopolymers decreases substantially only when they are immersed in corrosive solutions, such as simulated acid rain, HCl 0.5 Ν or 0.05 Ν. Addition of heavy metals (Pb, Cu, Ni or Cr) as nitrate or sulfate salts in high percentages affects negatively the compressive strength. However, the application of TCLP test shows that Pb, Cu, Ni or Cr are stabilized effectively in slag-based geopolymers. In order to elucidate the microstructure of geopolymers mineralogical studies using XRD, optical microscopy with reflected light, SEM, FTIR and TG, were carried out. Despite the amorphous nature of geopolymers, these techniques when combined assist in the elucidation of several geopolymerisation mechanisms.
Degree
thesis:*- Grantor dc:publisher
- Technical University of Crete (TUC)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Zaharaki, Dimitra
- Ζαχαράκη, Δήμητρα
Subjects
dc:subject × 18- Γεωπολυμερισμός
- Χαρακτηριστικά σκυροδέµατος
- Μεταλλουργικές σκωρίες
- Γεωπολυμερή
- Τσιμέντο
- Σκυρόδεμα
- Mineral industries
- Metal wastes
- Geopolymers
- Geopolymerization
- Φυσικές Επιστήμες
- Γεωεπιστήμες και Επιστήμες Περιβάλλοντος
- Επιστήμες Μηχανικού και Τεχνολογία
- Περιβαλλοντική Μηχανική
- Natural Sciences
- Earth and Related Environmental Sciences
- Engineering and Technology
- Environmental Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/31978