Back to search

University of Western Macedonia

Ανάπτυξη, χαρακτηρισμός και αξιολόγηση καινoτόμων καταλυτικών συστημάτων για την παραγωγή υδρογόνου από βιοκαύσιμα

Abstract

dc:description

In the present thesis, by the title „Synthesis, characterization and evaluation of innovative catalytic systems for hydrogen production from biogas‟, is investigated the process of reforming reaction of biofuels, such as biogas, for a production of a gas stream rich to hydrogen. During the past decades, the greenhouse effect and the climate change, resulting basically from the use of fossil fuels for energy production, lead to the need of new sources of energy. Renewable energy sources are related to much lower production of greenhouse gases and at the same time they are naturally replenished. As a result, current worldwide research activities focus on the production of fuels from renewable sources. The present thesis is a part of the above mentioned research activity and focuses on the production of hydrogen as an energy carrier from renewable sources and especially from biomass. Hydrogen has the significant advantage of producing no air or other pollutants in its transformation to energy, while fuel cells, which operate primarily on hydrogen, offer enhanced efficiency in power generation. However, real environmental benefits are linked to the ability to produce hydrogen from biomass, with no net production of carbon dioxide (CO2).The dry reforming reaction of biogas is entirely feasible from the thermodynamic point of view, favored at high temperatures, at the range of 700 - 9000C. The whole process is aiming the usage of two main greenhouse gases, methane (CH4) and carbon dioxide (CO2) for the production of gas stream rich to hydrogen. Thus, the process is important from the environmental point of view. Moreover, the reformation of two abundant compounds (methane and carbon dioxide) to useful products is a basic part of research in the field of environmental catalysis. A variety of nickel catalysts supported on metal oxide carriers (Al2O3 and CeO2-Al2O3) were tested under conditions of dry reforming of clean model biogas (60% methane and 40% carbon dioxide). All the promising catalysts were tested in realistic conditions in the form of pellets, leading to experimental results for direct application in the future.The effect of the different method on catalyst preparation to the activity, selectivity and stability towards the reforming reaction of biogas, was also investigated, whereas a theoretical model predicting the active metal species macro-distribution on cylindrical γ–alumina extrudates was developed, in order to compare theoretical model predictions and experimental data.Moreover, the improvement of the catalytic performance of the supported on alumina nickel catalysts, was accomplished through the control of the catalyst preparation method and the addition of cerium oxide (CeO2), that lead to the maximization of the activity, efficiency and life time of the innovative catalysts.Ni-based catalysts present high activity and stability as a function of time on stream to the dry reforming reaction of biogas at the temperature range of 700 - 9000C. Doping of CeO2 as an additive promoter on Ni/Al2O3 improves the dry reforming activity as well as the nickel dispersion at the support‟s surface. According to the literature (800 - 10000C), by applying CeO2, the major pathways for carbon formation could be inhibited by the redox reactions between methane and carbon monoxide (produced during the dry reforming process) with the lattice oxygen (Ox) at CeO2 surface (forming hydrogen and carbon dioxide), resulting in an increasing hydrogen production and minimizing the production of CO. It is noteworthy, that the H2/CO ratio increases significantly increasing the ceria loading at the support, from 0.55 (without CeO2) to 0.65 (10% CeO2 at the support) and 1.3 (20% CeO2 at the support).Increasing the metal loading from 7 to 15wt% Ni, methane and carbon dioxide conversions, as the hydrogen yield, increase at 800 - 9000C temperature range, due to higher concentration of the active phase in the resulted catalyst. Furthermore, the specific surface areas of the supported catalysts reveal that the surface area of the support is basically affected at high metal loadings (15 or 16wt %). Additionally, an increase in the nickel loading increases the nickel crystalline size, thus resulting in a decrease in the nickel dispersion on alumina.Aiming the synthesis of improved catalysts with micro distributions of the active phase on catalyst extrudates, a new technique (combined edf-wet) was developed, which is a modification of the Equilibrium Deposition Filtration method (EDF) that is used for supported catalysts preparation with high metal dispersion, in combination with the wet impregnation method, which is mainly used in heterogeneous catalysis.The catalysts with an egg-shell nickel micro distribution, showed higher reactant conversions and higher H2/CO ratios at the final product, especially in low metal loading (7wt %), compared to the catalysts with high metal loading, where the activity is not influenced by the type of micro distribution.Moreover, aiming the prediction of the active phase micro distribution at the support‟s surface, a theoretical model was developed, which predicts the active phase micro distribution at catalytic extrudates and the predicted results were compared with the experimental results. The model was applied in the impregnating process for nickel supported on cylindrical γ–alumina extrudates catalysts preparation where the active ions are adsorbed at the active sites of alumina, and was predicted that at specific experimental conditions, catalytic materials with nickel egg-shell micro distributions are developed at pH=7.0 and nickel uniform micro distributions are developed at pH=4.5, in agreement with the experimental results.All the above constitute the most important originality of the thesis, which is summed up to the synthesis of active and stable catalytic materials with high hydrogen yields and low carbon deposition, which is a major drawback of the reforming process. Finally, catalyst development with different preparation techniques, the nickel micro distributions on alumina and the development of a theoretical model for the prediction of the micro distributions of the active phase, enhance the innovation of the thesis in the field of heterogeneous catalysis.

Degree

thesis:*
Grantor dc:publisher
University of Western Macedonia
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Bereketidou, Olga
  • Μπερεκετίδου, Όλγα

Subjects

dc:subject × 23

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/32638

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Bereketidou, Olga; Μπερεκετίδου, Όλγα. Ανάπτυξη, χαρακτηρισμός και αξιολόγηση καινoτόμων καταλυτικών συστημάτων για την παραγωγή υδρογόνου από βιοκαύσιμα. University of Western Macedonia, 2011. http://hdl.handle.net/10442/hedi/32638