Back to search

National Technical University of Athens (NTUA)

Συμβολή στη διάγνωση βλαβών αεριοστροβίλων με χρήση μεθόδων ανάλυσης μετρήσεων ταχείας απόκρισης

Abstract

dc:description

This Doctoral Dissertation is in the area of gas turbine diagnostics using dynamic (fast response) measurements, and in general in the decision support systems domain. In particular, we investigate the possibility of diagnosing blading and combustion chamber faults, and then we develop methods for the automation of the diagnosis as well as for the design and optimization of fault diagnosis systems.In this direction initially a number of theoretical studies have been conducted for assessing the possibilities of diagnosing the above types of faults. Models of various signals were constructed, both for healthy operation as well as for operation with these faults. From these studies useful conclusions were drawn concerning the diagnostic information that these signals contain and its basic characteristics.Based on these conclusions were designed and conducted two series of realistic experiments in an industrial gas turbine. The first series of experiments concerned the healthy operation of the engine, and aimed at the study of the basic characteristics of various kinds of signals. The second series of experiments concerned the faulty operation of the engine, and aimed at the study of the behavior of the above signals in this case. A number of representative blading and combustion chamber faults were artificially introduced in the above industrial gas turbine. During these experiments were acquired signals of pressure, vibration, sound and shaft displacement at the bearings, in different operating points. These signals were processed using various different methods both in the time and in the frequency domain. From them were resulted: 1. the main characteristics of these signals, the main physical phenomena affecting them, as well as their dependence on the operating point. 2. The main characteristics of the diagnostic information they contain.Then a more detailed quantitative study and analysis of the diagnostic information of these signals. In this direction were developed methods for the quantitative comparison of corresponding signals of healthy operation and operation with the faults, and for the processing of the produced from this comparison ‘signatures’ of these faults. These methods allow the quantitative analysis of the diagnostic information of the signals, with respect to the diagnosis of fault existence, as well as the recognition of the specific fault. These methods were applied to the experimental signals. The conclusions were used as foundation for the development of a series of methods for automated fault diagnosis. In particular, initially a method was developed for the automated diagnosis of fault existence. Next, two alternative methods for the automated fault recognition were developed, with the first of them being of geometric and the second of statistical nature. For the case of faults of individual rotor blades was developed a method for the identification of the specific faulted blade. Next, a method was developed for the optimization of the parameters used for the diagnosis. Beyond the above diagnostic methods, the problem of the design of diagnostic systems was also investigated. In this direction was developed a method for the quantitative assessment of the diagnostic information and the diagnostic capabilities of different measurement instruments. This method allows the comparison of different measurement instruments with respect to their diagnostic capabilities, and the selection of the least possible and most appropriate ones for the diagnosis, which is very important both for operational and operational reasons. Furthermore, we developed a quantitative method for the assessment of substituting the measurement of diagnostically useful signals, with their reconstruction using other signals. The above methods were applied in the experimental signals, and this was quite successful.The above methodologies are designed so that they are complementary with respect to the diagnostic information they provide, and also there is compatibility among them. For this reason their synthesis is feasible, so that they constitute components of an expert diagnostic system for supporting maintenance decisions. They fulfil the needs of both faults diagnosis and diagnostic systems design. Therefore they are a useful tool for the support of decision making concerning the maintenance of gas turbines, and machinery in general, which can meet modern needs.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
1993

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Loukis, Euripidis
  • Λουκής, Ευριπίδης

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/32989

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Loukis, Euripidis; Λουκής, Ευριπίδης. Συμβολή στη διάγνωση βλαβών αεριοστροβίλων με χρήση μεθόδων ανάλυσης μετρήσεων ταχείας απόκρισης. National Technical University of Athens (NTUA), 1993. http://hdl.handle.net/10442/hedi/32989