Aristotle University Of Thessaloniki (AUTH)
Ανάπτυξη μεθοδολογιών ανάλυσης και σχεδιασμού συστημάτων σεισμικής μόνωσης της βάσης των κτηρίων για την ελαχιστοποίηση της στρεπτικής τους απόκρισης.
Abstract
dc:descriptionBase isolation is one of the most recent and effective means of protecting a structure against the devastating effects of strong earthquake motions. In case of structures with plan asymmetries though, the torsional response of the base isolation system may be significant. This means that the simultaneous horizontal displacements among the bearings will not be equal and this may affect the proper behavior of the isolation system. According to scientific literature, the majority of the researchers have come to the conclusion that the torsional response of the isolation system is reduced significantly when its Center of Rigidity coincides with the Center of Mass of the isolated structure (case CRB=CM). This approach has also been implemented in the International Standards (ASCE, FEMA, EC8), but it lacks theoretical validation. This dissertation’s objective is to develop analysis and design methods in order to minimize the torsional response of base isolation systems in asymmetric structures and more specifically to determine the Optimum location of the Center of Rigidity of the Base isolation system (OCRB), so that all the bearings will have equal simultaneous horizontal displacements under lateral seismic excitation. Three different methods are developed, that are based on the use of either lateral static loads, or dynamic (modal) analysis. The dissertation focuses on the method which is based on the use of dynamic analysis with mode superposition (response history or response spectrum analysis), because it takes into account the true dynamic properties of the base isolated structure. Τhis method’s applicability is presented for: (a) base isolation systems with elastic lateral behavior, as in the case where low-damping rubber bearings are used, (b) base isolation systems with bilinear inelastic lateral force-displacement laws, as in the case where lead rubber bearings are used. The proposed method is applied to various asymmetric single-story and multistory buildings, with different dynamic characteristics, and linear and non-linear analyses are used to quantify its effectiveness. At the same time, the influence of several important parameters of torsional coupling on the location of the OCRB and the effectiveness of the method is investigated. The results show that the use of the OCRB reduces significantly (2 to 4 times) the rotational value of the base isolation system, compared to the method that is suggested so far in literature and in International Standards (case CRB=CM), thus validating numerically the effectiveness of the proposed method in reducing the torsional response of base isolation systems. At the same time the influence of the proposed method on the maximum horizontal displacement of the bearings is also studied. It is noted that the significant reduction in the rotational value offered by the use of the OCRB, does not always lead to the reduction of the maximum horizontal displacements of the bearings, compared to the case of CRB=CM.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Doudoumis, Nikolaos
- Δουδούμης, Νικόλαος
Subjects
dc:subject × 14Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/33124