Back to search

National Technical University of Athens (NTUA)

Σχεδιασμός και κατασκευή προσομοιωτή οσμών για ιατροδικαστικές εφαρμογές

Abstract

dc:description

The chemical environment in the debris of collapsed buildings is extremely complex. Various sources emitting Volatile Organic Compounds (VOCs) and gases, such as entrapped victims, dead bodies, household wastes, construction materials, fires, gas leaks, contribute to it. Concentrations of VOCs in the debris are usually in the area of ppt to ppb level and potentially can increase to ppm level after hours/days of entrapment. The chemical environment in the debris is affected by a number of random, non-reproducible and uncontrollable factors, such as the emission dynamics of VOCs and gases from the various sources, the wind velocity, the temperature, the humidity and dust, the interactions between the emitted chemicals or interactions of the emitted chemicals with the construction materials and the indoor air quality as well as the urban pollution.The technical challenge in developing an Odour Simulator which can provide such atmospheres is to minimize the interactions between the analytes and the apparatus which contains them. As vapor phase concentrations reduce, these interactions become more significant. Competitive absorption phenomena, temperature effects, gas-phase mixing all combine to introduce significant uncertainty and non-reproducibility in the simulator.The release of a plume of volatile organic compounds from the surface of a collapsed building will not be a continuous and stable process but rather a dynamic process. This is due to a number of factors. First of all the emission process from a certain source might have a dynamic profile. For example, a source might emit substances not continuously but with a periodicity and/or with variable intensity. Other factors that contribute to a dynamic concentration profile could be the wind velocity which affects the motion of the plume, the rubbles structure (e.g. accumulation in confined spaces) or the interactions of the plume with the construction material (e.g. absorbance, reaction).The general conclusions of the PhD thesis are summarized in the following:•The Odour Simulator shows quite distinctive responses against the experimental conditions that were tested. This is clear both for single compounds of interest as well as for synthetic mixtures•The duration of the odor generation was as long as 26 min•The relative standard deviation of the odor signal in the reference detector was approximately 11%•A method was established for producing near real synthetic odor samples for human decay and urine•A minimum impact of the construction material on the generated odor was observed•Water phase and ammonia had a low impact on the vapor generation•The Analysis of Variance determined the factors (Odor Simulator parameters) that have a significant effect in the produced concentration and can, thus, be further elaborated for optimization of the system

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2011

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Pallis, Georgios
  • Πάλλης, Γεώργιος

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/33188

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Pallis, Georgios; Πάλλης, Γεώργιος. Σχεδιασμός και κατασκευή προσομοιωτή οσμών για ιατροδικαστικές εφαρμογές. National Technical University of Athens (NTUA), 2011. http://hdl.handle.net/10442/hedi/33188