Back to search

University of Patras

Σχεδιασμός, ανάλυση και βελτιστοποίηση συστήματος απάντλησης πετρελαίου από ναυάγια σε μεγάλα βάθη

Abstract

dc:description

In this PhD work, the mechanical design of a Sub sea Oil Recovery Structure is carried out. The structure is consisted of 6 different parts. The mechanical design methodology starts with the calculation of the diameter of the mooring lines for a tension force of 10000 kN. The fluid/structure interaction is a design aspect for the Riser tube. Analytical equations were used to identify the dimensions of each riser tube’s part in order to avoid Vortex Induced Vibrations (VIV). As a second step, the oil upward movement into the riser tube was investigated. The buoyancy flow was examined using CFD analysis for both, vertical and inclined tube position to confirm that the crude oil could overcome the frictional forces due to contact with the internal tube’s wall. The external flow field around the riser tube, with the mooring lines along its periphery, was investigated in order to calculate the hydrodynamic coefficients for a range from 0.1 to 0.7 m/sec. This analysis was necessary since it helps to quantify the hydrodynamic load for the structural analysis. The structural analysis for the riser tube parts was performed using FEM and it was used for the study of the behavior under “local” loads such as the sea current’s dynamic pressure. The Buffer Bell’s analysis is based on the prediction of hydrodynamic coefficients (obtained from CFD analysis) and the use of a FE model for the structural analysis of the Buffer Bell hull subject to the hydrostatic pressure. The maximum displacement of the system due to the sea currents was also examined. A scale model test was performed in a water tunnel and a dynamic response model was created in order to predict the system’s behavior under operational loads and during the deployment phase. Additional, a FE model was developed to predict the loads (forces and moments) acting on the stiffening rings and the dome interface unit during the operational scenario. This FE model was compared with the Dynamic Response Model for the maximum displacement criterion. The maximum loads (forces and moments) from the Maximum Displacement FE model was used for the calculation of the dimensions of the stiffening ring and the dome interface unit. Finite element models were developed for these two components. A CFD analysis was performed to investigate the pressure distribution over the surface of the Dome. This pressure load and the reaction forces resulted from the analysis of the Dome Interface Unit were used to calculate the stresses faced by the Dome and the total force applied on the mooring system. For the dimensioning of the anchoring system, the highest force calculated for the mooring lines was chosen. The volume of cement for the anchoring system was calculated in order to withstand this force. Analytical equations were used to secure the anchor’s stability on different types of seabed (cohesion or cohesion less). At the end, the maximum calculated force on the mooring line was compared against the force resulted during the first step in order to confirm that fracture does not occur. The conclusions from this analysis is that the system can be applied to all depths (shallow waters, ultra-deep waters) but also the final erection time should be minimized in order to increase the system’s efficiency.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2012

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Mazarakos, Dimitrios
  • Μαζαράκος, Δημήτριος

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/33259

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Mazarakos, Dimitrios; Μαζαράκος, Δημήτριος. Σχεδιασμός, ανάλυση και βελτιστοποίηση συστήματος απάντλησης πετρελαίου από ναυάγια σε μεγάλα βάθη. University of Patras, 2012. http://hdl.handle.net/10442/hedi/33259