National Technical University of Athens (NTUA)
Computational study of flow-structure interaction
Abstract
dc:descriptionA wide variety of engineering structures exhibit Vortex-induced Vibration (VIV) problems arising from the flow dynamics. Vortex-induced vibrations commonly involve excitation of the structure in both the in-line and transverse directions; thus they are characterized by complex trajectories, which often take the form of a figure eight. This thesis reports the results of a computational study of flow past a cylinder forced to oscillate in both the in-line and transverse directions with respect to a uniform stream, at a Reynolds number equal to 400. The in-line vibration occurs at twice the frequency of the transverse oscillation, resulting in a figure eight motion of the cylinder, emulating vortex-induced vibration. For a flow stream from left to right, we have distinguished between two oscillation modes of the cylinder, depending on the direction of the cylinder motion in the upper half plane: a counter-clockwise mode (if the upper part of the trajectory is traversed counter-clockwise), and a clockwise mode (if the upper part of the trajectory is traversed clockwise). Both two- and three-dimensional simulations of the flow were performed, using Direct Numerical Simulation (DNS) based on a Spectral Element Method (SEM). A spectral element based parallel code was used to enable efficient computations; the code has been evaluated for its performance and scalability in parallel computer clusters. This thesis reports on the results of both two- and three-dimensional simulations, quantifying the forces acting on the moving cylinder, and characterizing the wake dynamics. We have performed two-dimensional flow simulations of the two oscillation modes (counter-clockwise and clockwise), using a range of frequencies close to the natural frequency of the Kármán vortex street, and several oscillation amplitudes. We have calculated the non-dimensional values of the power transfer from the fluid to the body, the forces acting upon the cylinder, and have correlated the results to the structure of the wake. We have found that the results are greatly influenced by the direction in which the figure eight is traversed (counter-clockwise and clockwise). In general, the counter-clockwise motion maintains positive power transfer at higher oscillation amplitudes, and is also characterized by higher force levels. Flow field visualizations have shown that wakes are characterized by 2S structure (two single vortices) at low amplitudes, and more complicated wake structures at higher amplitudes. It is found that the presence of in-line oscillation affects the forces acting on the cylinder and the wake structures.Three-dimensional simulations have been performed for the counter-clockwise mode, for the case of resonant forcing. The results demonstrate a much smoother variation of force coefficients in comparison to the two-dimensional flow. In accordance with two-dimensional flow, the lift signal is characterized by the presence of the strong third harmonic component. The flow visualization has demonstrated the formation of 2S type mode in the wake, with the wake structure becoming very complex at high oscillation amplitudes. Three-dimensionality in the wake has been identified indicating the development of streamwise vortices interacting with Kármán vortices.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Peppa, Sofia
- Πέππα, Σοφία
Subjects
dc:subject × 10- Αλληλεπίδραση ροής με κατασκευή
- Ταλαντούμενος κύλινδρος
- Μέθοδος φασματικών πεπερασμένων στοιχείων
- Vortex-induced vibrations
- Oscillating cylinder
- Spectral element method
- Επιστήμες Μηχανικού και Τεχνολογία
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Engineering and Technology
- Other Engineering and Technologies
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/33266