Democritus University of Thrace (DUTH)
Μελέτη πάνω στην τροχιά διάδοσης ρωγμής κάτω από στατικά και δυναμικά φορτία
Abstract
dc:descriptionFracture Mechanics, a field in Engineering, has had a rapid development in the last 50 years. It has inverted many old ideas, and has introduced a new approach in structure design and structure failure. Imperfections, as are micro cracks , micro voids and impurities inside materials that compose structures have become the targets of research . The design and prevention of possible failure during the functioning stage of a structure has dominated.The application of conclusions of Fracture Mechanics, has demonstrated technological advancements in such fields as nuclear vessels, large storage areas, bridges, aerospace. In specific, the application in aerodynamics industry has led to a significant decrease in accidents due to mechanical failure, in spite the fact that time volume of flights has risen dramatically. Even with all these successes, some phenomena, because of their complexity, have not yet been well clarified. Such is the phenomenon of crack tip propagation, that, even though considered a phenomenon of material instability, encloses in itself stable and unstable states, a fact that indicates its complex character. One of the defining characteristics that determine the propagation of a crack is the trajectory that its tip follows and its type, that is, if its stable or unstable. All of the approaches, up to date, have been unable to provide a definitive answer. This is because we are unable to formulate differential equations for the description of the trajectory of the crack's tip, even though they exist in material point dynamics of Classical Mechanics.This Ph.D. Thesis focuses on the research of the determination of the trajectory that the tip of a crack will follow with emphasis on its type. Double cantilever beam specimen(DCB) have been selected and subjected static and dynamic force. This type of specimen has been selected for various reasons. It is used as the basic specimen for the calculation of needed constants of monolithic and composite materials, that have introduced by the research activity developed by Fracture Mechanics. Moreover, preexisting geometrical and load symmetry and the presumable idealized material symmetry, advocate in the maintenance of symmetry in the length propagation of the crack. This is not always apparent in crushed specimens. That is to say, we have directional instability. Therefore, questions formulated by large laboratories of international research laboratories emerge, such as: inexplicable and mysterious, the followed propagation trajectory of the crack's tip, is in many cases observed to deviate from its original symmetrical axis and in some of these cases to rejoin its original direction. This fact was a challenge for our research team. We have tried to provide possible answers.As the way and rate of the imposed load is a defining factor that participates drastically in the propagation of cracks in a structure , this research concentrated on the propagation trajectory of the crack's tip and type under static and dynamic loads . Target of this research was the influence of geometrical characteristics of the specimens for mode I and mode III loading and loading rate. For this research, models of the specimens were simulated using the finite element software ABAQUS and analytical expressions. For the confirmation of the results, experiments on the respective elements were conducted. For the experimental procedure, specimens were fabricated out of Plexiglass (PMMA) , a brittle material considered homogeneous . The initial length of the crack was in some cases made by saw and sometimes by laser. In order to give a natural geometry to the tip of the crack, without to remove material, it was made with a thin blade and special care. The experimental methods used were caustics, digital image correlation and rapid shot Cranz- Schardin system. Initially, the research of the stability of the propagation trajectory in double cantilever beam specimens subjected to static mode I loading focused on the research of the deviation from the symmetrical propagation in those cases where all geometrical factors advocate for the maintenance of directional stability. Geometrical parameters of control and response that affect the initial propagation angle and the crack's propagation trajectory were determined, and their role was clarified. Hypothesis of Maximum Gradient of Strain Energy Density was used to approach the problem. This method that has been introduced in recent years gives answers not only for the likely trajectory of the crack's tip, but also for its type, meaning if it will be stable or unstable . It uses the contours map of elastic strain energy density provided by the finite element software. After graphical processing resulting in the definition of the propagation's critical points, which, if linked, define the trajectory of the propagation. Furthermore, for comparison, the effectiveness of maximum tangential stress (maxσθθ), zero shear stress (τrΘ=0), and T-stress criteria was studied. Specimens with different geometric characteristics were employed in order to define the different behaviors and the limits between them. From this procedure, combining theoretical and experimental results, the map, classifying the behavior of the specimens subjected to static mode I loading according to the type of the crack path, was composed. There upon, the part of the research on the static propagation of the crack was extended to the determination of the stress intensity factor through processing of the images of the caustics in different time moments before and after the crack's propagation.After that, the research was focused on double cantilever beam specimens subjected to static lateral loading ( pure mode III ) , a subject not widely researched in international bibliography , due to the difficulties that appear in the application of this type of loading . In this part of the Thesis, for the target of the research an original apparatus for the application of pure mode III loading was constructed. The experimental results from this procedure are the innovation of this part of the Thesis, as, so far in most cases, the study of this loading mode was made in combination with mode I and mode II loadings. At the same time, the method of Hypothesis of Maximum Gradient of Strain Energy Density was applied , which accurately provided the crack path. There are no theories in international bibliography providing the crack path for this type of loading. Even the most analytical approaches for the forecast of the primary trajectory angle oppose the experimentally displayed ones.To help determining how the loading rate affects the crack path and its type, the research was extended to double cantilever beam specimens subjected to dynamic mode I loading. The target was to reflect the behavior of the dynamically loaded specimens on the map that was created for the specimens of the static mode I loading. An original apparatous for the application of impact loading was designed and constructed. The rapid shot Cranz- Schardin system provided snapshots of the experimental results in every moment of loading. Final results were imported in a minor modification of the map of the classification of the crack path and its type. The relation between propagation speed and stress intensity factor has been studied in international bibliography, but without making the correlation with the type and form of the crack path. The results show that the speed at the moment of the propagation's deviation from its original axis, increases with the speed of the linear propagation.
Degree
thesis:*- Grantor dc:publisher
- Democritus University of Thrace (DUTH)
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Givannaki, Faidra
- Γιβαννάκη, Φαίδρα
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/34631