Back to search

Technical University of Crete (TUC)

Παραγωγή εξανθρακώματος από βιομάζα για περιβαλλοντικές εφαρμογές

Abstract

dc:description

In the current PhD study, biochar was produced through pyrolysis of three types of biomass, in order to be used as a heavy metal adsorbent in aqueous solutions. The biomasses used were rice husk, sewage sludge and the organic fraction of municipal solid wastes. The first was chosen as one of the most abundant types of biomass worldwide, while the other two in order to find alternative innovative uses of these wastes.In a first step, the effect of pyrolysis temperature, residence time and biomass impregnation with K2CO3 and H3PO4 on biochar yield was examined. Among the aforementioned parameters, pyrolysis temperature was the one that affected pyrolysis yield, as increasing temperature from 300 to 5000C resulted in a 35% reduction in biochar yield (for the case of biochar derived from sewage sludge). Pyrolysis of the organic fraction of municipal solid wastes at 3000C for 30 min gave the maximum biochar yield, which was 66,1%. Besides temperature, the rest of the parameters did not have any significant impact on biochar yield. Afterwards, a series of standard TCLP tests was conducted in order to assess the potential release of heavy metals present in sewage sludge and in biochars derived from sewage sludge. Based on the results, heavy metal concentration in leachates was rather low (below 18 mg/kg) meaning that there is no environmental risk in applying the specific biochars in soil. Furthermore, biochars impregnated with K2CO3 released all their K content during the TCLP tests, indicating that biochar application to soil could be a valuable source of K for crops and thus enhance soil-plant interaction.In a next step, biochar and soil sorption ability towards three heavy metals, namely As5+, Cr3+, Cr6+, was assessed. All adsorbents were found to be very effective in removing Cr3+ from aqueous solutions, as removal rates were, in many cases, approximately 100%. However, removal rates for As5+ and Cr6+ were not that high, probably due to the anion nature of the specific metals. Biochar derived from sewage sludge was the only adsorbent that was efficient in removing approximately 90% of the initial Cr6+ concentration, probably due to its high Fe content. In order to enhance biochar ability to immobilize heavy metals, biomasses were modified with Ca2+, Fe0 and Fe3+ at two different ratios prior to pyrolysis and then their sorption capacity towards As5+ and Cr6+ was investigated. Although biochar modification enhanced their As5+ sorption capacity (in many cases removal rates were above 95%), it did not have positive effects in Cr6+ removal rates.The current study showed that biochar environmental application is a rather promising technique. Altering pyrolysis conditions and modifying biomasses with the appropriate chemical agents could significantly improve biochar properties and thus enhance the environmental benefits arising from its application.

Degree

thesis:*
Grantor dc:publisher
Technical University of Crete (TUC)
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Agrafioti, Evanthia
  • Αγραφιώτη, Ευανθία

Subjects

dc:subject × 10

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/34879

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Agrafioti, Evanthia; Αγραφιώτη, Ευανθία. Παραγωγή εξανθρακώματος από βιομάζα για περιβαλλοντικές εφαρμογές. Technical University of Crete (TUC), 2014. http://hdl.handle.net/10442/hedi/34879