Aristotle University Of Thessaloniki (AUTH)
Βελτίωση μηχανικών / φυσικών ιδιοτήτων σκωρίας ηλεκτρικού κλιβάνου για χρήση ως αδρανούς υλικού σε σκυροδέματα
Abstract
dc:descriptionThe thesis deals with the modification of the production process incorporated in electric arc furnaces in steel industry. The modifications are targeting towards valorisation of the largest-in-volume by-product, electric arc furnace slag. The objective of the research is the modification of physical properties of slag by initiating soluble solids as well as intervention in the cooling process. The objectives also include study of physical properties of the modified slag, implementation of the new by-product in cement concrete as well as the economic feasibility of the project. The research is specifically aiming at the reduction of the specific weight of slag. The most important finding is the reduction of specific weight by 7,5% compared to unmodified slag, with the addition of 10% perlite. The decrease in specific weight is achieved in two modification procedures. The addition of the rest of the soluble solids is not inducing considerable change in specific weight, while, in some cases (bauxite, olivine), specific weight is increased. The addition of solids alters the microstructure and chemical composition of the slag, while changes on the physical properties concerning durability (LA index, abrasion, PSV, wear) are not statistically significant. The number of observed phases and the homogeneity of slag grains, as proved by SEM images, depend both on the presence and nature of the added solid as well as on the cooling method. The same factors have significant impact on water absorption. The increase in percentage of solid in the mix linearly alters the specific weight of the mix. Practically, however, the addition can take specific maximum values, which are set by the steel producer in order to allow unhindered operation of the EAF (basicity indices). Comparison between the two processes shows that the addition of solids inside the EAF presents significant benefits and is evaluated as the best practice as (a) added solid is fully utilized and, (b) uniformity in slag composition is achieved. The test results on the industrial scale samples show that both modified and unmodified slag aggregates meet the demands set by international and domestic specifications (EN 12620, ΚΤΣ '97) as well as special requirements (volume stability). The economic benefits are significant for steel industry, the slag processor but also for the end user. For the steel industry, the modifications initially induce additional costs related to the supply of soluble solid. The benefits, on the other hand, by improving melting efficiency, counterbalance the costs. For slag processor, the cost is expected to increase. The cost of treatment depends on energy costs. The economic profits from the modification can be calculated considering the end use. For concrete with modified slag aggregates, the economic profit, expressed in terms of price increase compared to unmodified slag, is inversely proportional to the specific gravity. The profit (final/original price ratio) is high for low prices of unmodified slag aggregates and tends to decrease as the price increases. In the case of asphaltic concrete the benefit is significantly higher due to higher transportation and production costs compared to concrete production.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Liapis, Ioannis
- Λιάπης, Ιωάννης
Subjects
dc:subject × 25- Σκωρία
- Ηλεκτρικός κλίβανος
- Ειδικό βάρος
- Μεταλλουργία
- Ανακύκλωση
- Αδρανή υλικά
- Σκυρόδεμα
- Slag
- Electric arc furnace
- Specific weight
- Metallurgy
- Recycle
- Valorisation
- Aggregates
- Cement concrete
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμη Χημικού Μηχανικού
- Μηχανική Υλικών
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Engineering and Technology
- Civil Engineering
- Chemical Engineering
- Materials Engineering
- Other Engineering and Technologies
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/34905