Back to search

University of Patras

Ανάλυση, σχεδιασμός και κατασκευή ηλεκτρικού κινητήριου συστήματος με σύγχρονο κινητήρα μονίμων μαγνητών: βάση ανάπτυξης ηλεκτροκίνητου οχήματος κυψελών καυσίμου

Abstract

dc:description

This thesis deals with the analysis, design and deployment of an electric drive system with a brushless DC (BLDC) motor, which is the basis for the development of a Fuel Cell Electric Vehicle (FCEV). Particularly, this thesis focuses on the electrical systems (propulsion and sources) of a lightweight vehicle and gives emphasis on position sensorless commutation techniques of a BLDC motor drive system. From that perspective, the issues concerning the embedded Hall effect sensors are highlighted and the effects of incorrect positioning or displacement of sensors in the operational characteristics of this type of motor are investigated. Additionally, a method for identifying and quantifying the angle of deviation from the correct position of Hall effect sensors is proposed, based on back Electromagnetic Force (EMF) zero crossing points. It should be noticed that the proposed method is implemented for real time fault detection and identification. Moreover, the already published position sensorless commutation methods for BLDC motor drive systems have been assessed based on their applicability to various types of permanent magnet synchronous motors, the operating range of the motor, the reliable identification of the correct commutation instant and the computational cost for their implementation. A novel method for position sensorless commutation of a BLDC motor drive system with trapezoidal back EMF has been proposed exploiting the Zero Sequence Voltage (ZSV). The incorporation of the proposed method in the BLDC motor drive system enables extended operational speed range of the motor without load torque limitations while the accurate commutation instants are defined reliably within that range (accurate zero crossing point detection of the information signal). It should be noticed that the overall cost for implementing this method is kept low. Finally, in this thesis, an energy management strategy for a BLDC motor drive system power by multiple electrical sources is proposed, as the basis for a FCEV constitution. The effectiveness of the proposed strategy is verified through a simulation scenario for typical urban driving cycle.Specifically, in Chapter 1 the need for replacement of internal combustion engines by electric machines in the automotive sector is highlighted. Also, a brief description of the aims and the structure of this thesis are provided. In Chapter 2 an introduction of permanent magnet synchronous machines technology is provided. The design features of machine components and their influence on the electrical characteristics of these electrical machines are provided. Also, a comparative study for permanent magnet synchronous motors (PMSM) and BLDC motor is presented.In Chapter 3 the operational behavior of a BLDC motor with trapezoidal back EMF driven by a three phase inverter that utilizes Hall effect sensors is investigated. The issues raised by the utilization of Hall effect sensors for the commutation techniques are highlighted. This chapter also presents a study of the side effects of Hall sensors misplacement on BLDC motor operation. Concluding this study, a method for detecting the incorrect placement of Hall sensors and for determining the exact angular misplacement is proposed. In Chapter 4 a comprehensive study of already known position sensorless commutation techniques for BLDC motor drive systems is presented. These methods are classified with respect to the electrical characteristics that utilize for extracting information regarding the rotor position and the required measurement and processing units.In Chapter 5 a novel position sensorless commutation method for a BLDC motor drive system is proposed by the author of this thesis. The effectiveness of the proposed technique is verified via simulation results of the investigated drive system. Also some experimental results from the intermediate processing steps of the proposed technique are provided.In Chapter 6 the constructed in our Laboratory experimental setup is presented. Experimental results of the investigated BLDC motor drive system which incorporates the proposed position sensorless commutation method are presented. The proposed method and the experimental results are assessed for steady state and during transient in comparison to those coming from embedded Hall sensor. In Chapter 7 an application of the investigated BLDC motor drive system as a propulsion system in electric vehicles is provided. In this context, a comparative study of the existing electric vehicle architectures is provided. In Chapter 8 the technology of Fuel Cells (FCs) with emphasis on Proton Exchange Membrane Fuel Cells (PEMFC) are provided. The electrical characteristics of a PEMFC stack are extensively analyzed and experimental investigation has been carried out for the operational behavior of a commercial PEMFC stack to be clarified. These results provide the basis for developing a mathematical model for the given stack in the Matlab/Simulink environment. In Chapter 9 the architectural interconnection of the supply system with the propulsion system is described. Also, a literature review of the already known energy management methods for pure electric vehicles with hybrid power supply system is provided. In this chapter an energy management strategy is proposed for dual BLDC motor drive system powered by two different electrochemical energy sources. The effectiveness of the proposed method is evaluated in the investigated system via simulation in Matlab/Simulink environment for a typical urban driving cycle. Finally, in Chapter 10 the original contribution of this thesis to the research domain of BLDC motor drive systems power by electrochemical energy sources is highlighted, its additional results are noted and subjects of possible future work are presented.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Savvas, Tsotoulidis
  • Τσοτουλίδης, Σάββας

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/35235

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Savvas, Tsotoulidis; Τσοτουλίδης, Σάββας. Ανάλυση, σχεδιασμός και κατασκευή ηλεκτρικού κινητήριου συστήματος με σύγχρονο κινητήρα μονίμων μαγνητών: βάση ανάπτυξης ηλεκτροκίνητου οχήματος κυψελών καυσίμου. University of Patras, 2014. http://hdl.handle.net/10442/hedi/35235