University of Patras
Σχεδιασμός, ανάλυση και υλοποίηση κυκλωμάτων για τη μέτρηση και τον έλεγχο χωρητικών και ηλεκτροχημικών αισθητήρων
Abstract
dc:descriptionMolecular diagnostics systems have come to the forefront in recent years allowing for automated, reliable, rapid and inexpensive bioassays. Such systems are characterized by complex functionality, which combines variety of actuators and sensors that cooperate to perform biological protocols. Based on these protocols and using microfluidic systems, biological samples and reagents are subjected to various processing steps. Following this treatment, the samples under study are placed on the surface of sensors, which are functionalized to detect specific biological interactions of interest and respond accordingly by changing a physical quantity, measurable by electronic circuits.The sensor readout electronic circuits are one of the main parts of a molecular diagnostics system, as the diagnostic results are based on their response. Consequently, it is recognized that they hold an important role in the overall analytical process. It is necessary that the measurements they perform are highly accurate with high resolution for each sensor element. At the same time, the reliability of the measurement at a biological process level must be ensured. To this aim contributes the use of sensor arrays, with which the same measurement can be performed in parallel on many elements and accompanied by positive and negative control measurements. On the array, additional measurements of multiple samples can be performed, so that the output results give a more comprehensive analytical picture. In this light, large sensor arrays can provide optimal results.This thesis focuses on the readout circuitry for capacitive and electrochemical sensor arrays, two widely used sensor technologies. The operating principle of capacitive sensors is based on the fact that the interactions between the biomolecules under study exert forces and deform the flexible silicon film constituting an armature of a variable capacitor. The consequence of this deformation is a proportional change in capacitance between the film and the silicon substrate, a variation measured by the circuit. In the case of electrochemical sensors, the respective interaction of biomolecules, with the aid of labeling biomolecules, causes a change in conductivity between their electrodes. Under controlled bias voltage conditions, the resulting current that is measured corresponds to the progress of the biological phenomenon.Particular emphasis is given to the scalability potential of each architecture, so it can be optimally expanded for reading very large sensor arrays, maintaining small dimensions for the readout circuits. At the same time, through various strategies it is ensured that measurements of each element are properly acquired, without influence from other members in the array.To read out the capacitive sensor arrays an integrated circuit based on a 0.35 μm technology was designed and implemented, which at its measuring core uses a relaxation oscillator with a current hysteresis loop. It is complemented by programmable excitation current sources to cover a wide range of capacitances for the sensors. The multiplexing system that was developed to connect each member of the sensor arrays on the readout core can handle 'entangled' arrays, where the elements are arranged with common lines and columns of electrical contacts at their armatures. In this way it is possible to create large arrays with a small number of interface terminals.The challenge of reading such arrays lies in the interactions between the elements, because of side paths in the oscillator charging current. A first way to address this crosstalk problem is the use of two-state switches in the multiplexing units, in order to control the way in which the measured element is excited, as well as the other array elements, during measurement. Through successive measurements under different connection configurations on the multiplexers and appropriate mathematical processing, accurate measurements for the status of each sensor in the array can be obtained. The measured system can be considered static during successive measurements, which is a prerequisite for the correct calculation of results, due to the very slow progress of biological phenomena on the surface of the sensors.In the course of this thesis, a redesign of the array readout circuit was made, at a schematic and physical layout design level, the function of which was confirmed by post-layout simulations. In this development extra submodules were incorporated and existing ones were improved. One of the main features of this design is a buffer unit, which offers a second way of addressing the crosstalk problem between the elements, by preventing the oscillator charging current to excite undesirable elements. Furthermore, the redesigned circuit uses two oscillation units for simultaneous sensor readout and faster scanning of large arrays, with the range of their programmable current being greater, covering a larger spectrum of sensors. Finally, this version of the circuit has a more autonomous nature, by incorporating a serial communication and control subsystem.For the second sensor technology covered by this thesis, the electrochemical sensors, array readout circuits were designed and implemented using discrete components, as well as circuits with the basic measurement core being implemented in integrated form using a 90 nm technology. For these designs the technique of hybrid multiplexing was developed, whereby the members of the array are grouped appropriately to achieve the required performance in sampling rate from the readout circuit, while the size of the circuit remains small. Hybrid multiplexing combines sequential and parallel element reading, using multiplexers and the appropriate number of measurement subsystems that are reused for many sensing elements. The particularity of this type of measurements is the requirement for continuous biasing of all elements without interruptions in the current flow through them, which is addressed by specially configured two-state multiplexers that ensure the correct operating conditions.Additional enhancements offered by the implementation of the readout circuit in integrated form is the ability to switch between two types of measurement circuits, using a transimpedance amplifier and an integrator. The two modes of measurement are used in complement, to cover a wide operating dynamic range and fast response, and also high resolution, depending on the requirements during the experimental process.For the characterization of the readout circuits developed for both sensor technologies, measurements were made using standard loads, as well as arrays, to draw conclusions about their response. Following the validation of the proper operation of the circuits and methods used, successful measurements of biological significance were made, which were confirmed by reference systems.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Ramfos, Ioannis
- Ράμφος, Ιωάννης
Subjects
dc:subject × 18- Κυκλώματα ανάγνωσης αισθητήρων
- Βιοαισθητήρες
- Αισθητήρες χωρητικότητας
- Ηλεκτροχημικοί αισθητήρες
- Lab - on - a - chip
- Sensor readout circuits
- Biosensors
- Capacitance sensors
- Electrochemical sensors
- Lab-on-a-chip
- Φυσικές Επιστήμες
- Επιστήμη Ηλεκτρονικών Υπολογιστών και Πληροφορική
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Natural Sciences
- Computer and Information Sciences
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/35236