Back to search

University of Patras

Υβριδικά νανο-διηλεκτρικά πολυμερικής μήτρας/λειτουργικών εγκλεισμάτων: ανάπτυξη, χαρακτηρισμός και λειτουργικότητα

Abstract

dc:description

In this study, series of polymer matrix composite materials were developed and experimentally studied, varying the reinforcing phase content. The employed matrix was a high tech epoxy resin, while reinforcing phase was micro- and/or nano-barium titanate particles, as well as exfoliated graphite nanoplatelets. The choice of the materials was targeting to take advantage in a common composite system of the thermo-mechanical stability of the matrix, the high dielectric permittivity and the ferroelectric behaviour of barium titanate and the enhanced mechanical properties in tandem with the high conductivity of the exfoliated graphite nanoplatelets. The following composite materials systems were fabricated and studied, for various filler contents:(a)barium titante micro-particles/epoxy resin composite system,(b)barium titante nano-particles/epoxy resin composite system,(c)exfoliated graphite nanoplatelets/epoxy resin composite system,(d)barium titante micro-particles/barium titante nano-particles /epoxy resin hybrid composite system,(e)exfoliated graphite nanoplatelets /barium titante nano-partcles /epoxy resin hybrid composite system.The fabrication of the composites was followed by a multiple characterization of the produced specimens. For reference reasons pure resin was also prepared and studied. Systems’ morphology was investigated by means of scanning electronic microscopy and x-ray diffraction scattering. It was ascertained the existence of fine nanodispersions, as well as of small clusters, within the composites. XRD spectra verified the presence of filler in each category of composite systems. Thermal characterization was conducted via differential scanning calorimetry aiming to determine the glass to rubber transition temperature of all studied systems. Mechanical behaviour was investigated under static and dynamic conditions. Static behaviour was determined via three point bending tests at ambient temperature. It was found that modulus of elasticity increases with filler content in all composite systems categories. On the other hand, mechanical strength decreases with filler content. Dynamic response was studied by means of dynamic mechanical thermal analysis in a wide temperature range. Reinforced systems exhibit higher values of storage modulus, while the loss tangent peaks allow the determination of the glass transition temperature Tg. Tg slightly varies with reinforcing phase content, to higher or lower values depending on the type and the amount of filler concentration. These variations express the interactions between the phases of the composites and possibly the uncompleted wetting of the inclusions in some cases. The electrical response of the composite systems was examined by means of broadband dielectric spectroscopy in a wide frequency and temperature range. The analysis of the experimental data was carried out via the dielectric permittivity, electric modulus, and ac conductivity formalisms. The usage of all three formalisms provides the opportunity to extract more information concerning the physical mechanisms occurring within the composites. It was found that two dielectric processes are related to the polymer matrix. These are attributed to the glass to rubber transition of epoxy resin (α-relaxation) and to the re-arrangement of polar side groups of the main polymer chain (β-relaxation). The presence of inclusions within the matrix introduces electrical heterogeneity resulting in the occurrence of interfacial polarization. Unbounded charges accumulate at the interface of the phases, forming large dipoles, which exhibit inertia in orienting themselves parallel to the applied field. Interfacial polarization is the slowest process in the systems and thus it is observed at low frequencies and high temperatures. The real part of dielectric permittivity, as well as, the conductivity increase with reinforcing phase content, especially in the case of the systems with graphite nanoplatelets. The energy storage efficiency was investigated via the density of energy, at constant electric field. It was found that the energy storage capability increases with filler content. Optimum behaviour is displayed by the system with maximum content in graphite nanoplatelets.The dynamics of the relaxations was studied via Arrhenius graphs, from which the values of activation energy were calculated. Interfacial polarization and α-relaxation appear in adjacent temperature ranges, leading in a superposition of both processes. From the calculated values of activation energy it is concluded that in the pure resin specimen the dominating contribution is related to the α-relaxation, while in the composite systems the contribution of interfacial polarization seems to prevail.Barium titanate particles undergo a structural transition from the polar tetragonal structure (ferroelectric phase) to the non-polar cubic structure (paraelectric phase) at a critical temperature closed to 130oC. This transition was proved via XRD spectra and is more intense in the case of barium titanate microparticles.Systems’ functional behaviour is related to the thermally stimulated structural transition from the ferroelectric to the paraelectric phase of barium titanate inclusions, to the change of sign of the temperature coefficient of conductivity, and their ability for energy storage.The coexistence at adjacent temperatures ranges of α-relaxation and interfacial polarization, as well as the critical transition temperature of ferroelectric inclusions, hampers the discrimination of the effects. By introducing the dielectric reinforcing function the discrimination of the processes became possible. Furthermore, the dielectric reinforcing function provides the possibility to examine the functional behaviour and the energy storage efficiency of the systems, neglecting the materials’ geometrical characteristics influence. Finally, experimental results and analysis are compared and discussed.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Anastasios, Patsidis
  • Πατσίδης, Αναστάσιος

Subjects

dc:subject × 26

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/35338

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Anastasios, Patsidis; Πατσίδης, Αναστάσιος. Υβριδικά νανο-διηλεκτρικά πολυμερικής μήτρας/λειτουργικών εγκλεισμάτων: ανάπτυξη, χαρακτηρισμός και λειτουργικότητα. University of Patras, 2015. http://hdl.handle.net/10442/hedi/35338