National Technical University of Athens (NTUA)
Experimental and computational study of three-dimensional separation and its control using passive vortex generators
Abstract
dc:descriptionThe present thesis deals with the issue of three-dimensional separation of the Stall Cell type on rectangular unswept wings and also the control of Stall Cells using passive vortex generators. The problem was approached experimentally and computationally. Flow visualization tests, pressure measurements and Stereo Particle Image Velocimetry (PIV) experiments were conducted at the small test section of the National Technical University of Athens wind tunnel. On the computational side, an in-house solver of the unsteady Reynolds Averaged Navier-Stokes equations was used.The dynamic nature of Stall Cells was confirmed by the tuft flow visualization experiments and it was found that the inherent instability can be suppressed by means of a large enough spanwise disturbance. Computational data revealed the complex vortical structure inside a Stall Cell which was confirmed by the experimental results. A Stall Cell consists of three different types of vortices which strongly interact with each other: a) The counter rotating Stall Cell vortices that start normal to the wing surface within the separation line and extend downstream; b) The Separation Line Vortex that runs along the wing span; c) The Trailing Edge Line Vortex that also runs parallel to the wing trailing edge, but has vorticity of opposite sign compared to the Separation Line Vortex. The study of the turbulence characteristics of the flow reveals a highly anisotropic flow. Finally, based on the combined results a SC generation mechanism is suggested.As far as separation control is concerned, it was found that Stall Cell formation can be suppressed by means of passive vortex generators in the form of triangular vanes. Depending on the vortex generators position and the wing angle of attack, flow instability or bifurcation can appear. It was also shown that results from a computational approach that cannot predict Stall Cell formation (e.g. very small aspect ratio simulations) should be treated with caution. The Stereo PIV study of the vortex generator induced flow revealed that turbulent interaction between the vortex generator vortices and the underlying flow is strong closer to the generators while further downstream diffusion becomes the main mechanism that governs the flow.The present investigation comes in support of previous studies that highlighted the need to be cautious when using wind tunnel data, especially in the post stall region. The widely used assumption of two-dimensional flow over a two-dimensional airfoil set up is not valid when Stall Cells form. For the correct interpretation of experimental data it is vital to know how the tests were carried and what state of the flow was actually measured. Furthermore, the three-dimensionality of the flow should be taken into account when it comes to separation control.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Manolesos, Marinos
- Μανωλέσος, Μαρίνος
Subjects
dc:subject × 14- Τρισδιάστατη αποκόλληση
- Κυψέλες ανακυκλοφορίας
- Έλεγχος αποκόλλησης
- Γεννήτριες στροβιλότητας
- Πειραματική αεροδυναμική
- Three-dimensional separation
- Stall cells
- Separation control
- Vortex generators
- Wind tunnel testing
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/35506