University of Ioannina
Ανάλυση των μικροτάσεων που αναπτύσσονται σε τεχνητά μηριαία οστά χρησιμοποιώντας διαφορετικούς αυχένες αρθρωτής μηριαίας πρόθεσης σε βιομηχανικό μοντέλο προσομοίωσης
Abstract
dc:descriptionIntroduction Modular total hip arthroplasty incorporating a double taper designis an innovation offering distinct advantages. Changes in femoral offset, neck lengthor femoral anteversion are expected to alter the strain distribution at the femur.Furthermore, a modular head-neck taper allows intra-operative fine-tuning of hipbiomechanics. Changes in head height, and consequently femoral offset, are alsoexpected to alter the strain distribution at the femur.Materials and Methods We analyzed the strain patterns of all possible types ofnecks of a modular neck prosthesis, implanted in a composite femur. In this study aset of cementless modular system with a total of 22 combinations was used. We alsoused two length variations of the modular neck prosthesis, combined with threedifferent head height variations (S, M and L). A custom-made fixture designed toreproduce loading conditions during the single-leg stance phase of walking wasattached to the load cell of a computer-controlled hydraulic testing machine and straingages were fixed along the lateral, medial-anterior and medial-posterior surface of themodel. Load cycles were programmed to simulate single-leg stance of a normalweightsubject.Results Longitudinal deformation was compressive on the medial side andtensile on the lateral. The load distribution along the shaft presented a certain pattern,while stress pattern at the tronstrochanteric area was more complex. Compressivestress at the calcar region was exacerbated by the use of the varus neck. Increasedstrain induced by necks with combined characteristics or short necks couldtheoretically lead to avoidance of stress shielding in vivo. Anteverted neckcombinations resulted in higher strain at the anterior cortex around the tip of theprosthesis. Short necks exhibited lower stress at the femoral shaft and higher at thetrans-trochanteric area. Using a Long Neutral neck, stress analysis from the uni-axialstrain gages indicated that the L-head-height variation led to higher stress at all sites,followed by the S-height and consequently the M-height variation, whereas at thetrans-trochanteric area the L- and S-variations resulted in higher stress at all sites. Using a Short Neutral neck, stress analysis from both the uni-axial and the rosettestrain gages indicated that the L- and M-height variations showed equivalent largerstress signal than the S-variation, with the L-head prevailing in most sites. No extremeloading behavior was recorded.Conclusions The surgeon should be cautious in the use of certain combinations,such as necks with combined characteristics or short necks. Anteverted neckcombinations could be more prone to anterior thigh pain. Combinations of the M headwith the Long Neutral neck and the S head with the Short Neutral neck may be moreprone to the development of stress shielding. On the other hand, the increased straininduced by the use of the L-height variation could theoretically lead to bone retentionin vivo.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Politis, Angelos
- Πολίτης, Άγγελος
Subjects
dc:subject × 20Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/35946