University of Western Macedonia
Ανάπτυξη κυψελών καυσίμου αγωγών πρωτονίων υψηλής θερμοκρασίας για τη συμπαραγωγή ηλεκτρικής/θερμικής ισχύος και χημικών προϊόντων
Abstract
dc:descriptionToward the direction of fuel cells scale up and commercialization, the innovative character of the present thesis is based on the synthesis, characterization and evaluation of novel and efficient materials, to be employed as anodic electrodes/catalysts in internal reforming proton conducting SOFCs, fed with iso-octane or bio-ethanol. To this end, the iso-octane steam reforming reaction over Cu-based catalysts supported on rare earth oxides (La2O3, CeO2, Sm2O3, Pr6O11, Nd2O3, Gd2O3), was initially explored. The results revealed that the best performance was achieved for the CeO2-supported catalyst, which demonstrated ~55% H2 yield at 700 oC and a H2O/C feed ratio equal to 3. The order of performance for the different Cu/REOs catalysts was as follows: CeO2 >> Nd2O3 > Gd2O3 > Sm2O3 ≈ Pr6O11 ≈ La2O3. The superiority of Cu/CeO2 was ascribed to its high BET surface area and pronounced redox properties, compared to the other Cu-supported REOs catalysts. However, a notable degradation was observed during the stability tests, which was attributed, mainly, to carbon deposition and intense sintering during operation.In the following, the feasibility of enhancing the catalytic performance and durability of Cu-based catalysts during steam reforming reaction was examined, by employing active catalytic carriers (CeO2) and/or bimetallic phases of the form Cu20-xCox/CeO2 (x=0-20 wt%). The monometallic Co/CeO2 catalyst, exhibited the optimum performance in terms of H2 yield (77% H2 yield at 700 oC), accompanied by an excellent stability behavior. The superior catalytic performance of Co/CeO2 catalyst was assigned to its lower reducibility associated with the formation of Co3+ species in a Co3O4-like phase. In addition, the high concentration of surface oxygen species on Co/CeO2 catalysts were considered responsible for the gasification of carbon deposits and the prevention of catalysts’ deactivation during reaction. Next, the reaction of ethanol steam-reforming over different CeO2-supported transition metals (Fe, Co, Ni, Cu) catalysts was examined. The optimum catalytic performance was achieved by the 20 wt% Co/CeO2 catalyst, which showed a H2 yield of up to 64% at temperatures higher than 600 °C and for a H2O/C feed ratio equal to 3. Long-term durability experiments demonstrated the excellent stable behavior of Co/CeO2 catalysts in the whole temperature range (400-800 oC) examined. On the other hand, an inferior stability performance, particularly at lower temperatures, was observed for all the other catalysts, following the order Co > Ni > Cu > Fe. The excellent durable behavior of Co/CeO2 catalysts, was, mainly, ascribed to the strong metal-support interactions, which in turn, resulted in high surface oxygen concentration. This factor, was considered responsible for the enhanced gasification of carbonaceous deposits, which protected the catalyst life.In the last part of the Thesis, the Co/CeO2 catalyst was employed as anodic electrode in proton conducting SOFCs (Co-CeO2/BZY/Ag) fed with H2, iso-octane/H2O and ethanol/H2O mixtures. The achieved power densities were relatively low, which is attributed mainly to the high thickness of the solid electrolyte (about 1 mm), as well as to various cell fabrication characteristics related to electrode’s adherence on solid electrolyte, current collectors, etc. Furthermore, it was observed that in the presence of pure H2, the ohmic (Rohmic) and the electrode (REL) resistances were high, although were significantly improved by increasing the cell temperature and the feed hydrogen concentration. In addition, the AC impedance spectra, showed two contributions, one at high frequencies, which is attributed to charge transfer reactions and a second one at low frequencies, which was associated to diffusion processes taking place at the anodic and cathodic electrodes. When iso-octane/H2O mixtures were used as feedstock, the electro-catalytic results showed that significant carbon deposition took place resulting to reduced H2 production rates and consequently, to cell gradual degradation. In contrast, the corresponding results in the case of EtOH/H2O mixtures, were more promising. Specifically, the hydrogen formation rates and the achieved electrochemical performance were comparable to those obtained under pure hydrogen feed.Summarizing, it was found that the Co/CeO2 catalyst showed excellent catalytic activity and resistance to coke deposition during iso-octane or bio-ethanol steam reforming reactions. However, its electrochemical behavior as anodic electrode in internal reforming proton conducting SOFCs was not sufficient. Certainly, by elaborating further improvements in cell fabrication (synthesis and deposition of electrodes), it will be possible to obtain higher power densities at levels close to those achieved in the current state of the art oxygen ion conducting (O2-) SOFCs.
Degree
thesis:*- Grantor dc:publisher
- University of Western Macedonia
- Year dc:date
- 2015
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Ioakeimidis, Zisis
- Ιωακειμίδης, Ζήσης
Subjects
dc:subject × 26- Καταλύτες
- Αντίδραση ατμο-αναμόρφωσης ισο-οκτανίου
- Αντίδραση ατμο-αναμόρφωσης αιθανόλης
- Καταλυτική ενεργότητα
- Πειράματα σταθερότητας
- Στερεοί ηλεκτρολύτες
- Ηλεκτρόδια
- Πρωτονιακοί αγωγοί υψηλής θερμοκρασίας
- Ηλεκτροχημικές μετρήσεις
- Ηλεκτροκαταλυτική παραγωγή υδρογόνου
- Catalysts
- Iso-octane steam reforming reaction
- Ethanol steam reforming reaction
- Catalytic activity
- Stability experiments
- Solid electrolytes
- Electrodes
- High temperature proton conductors
- Electrochemical measurements
- Electrocatalytic production of hydrogen
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Mechanical Engineering
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/36320