Agricultural University of Athens
Μελέτη της θερμικής επεξεργασίας τροφίμων με διαφορετικές γεωμετρίες με τη βοήθεια της υπολογιστικής ρευστοδυναμικής
Abstract
dc:descriptionThe aim of thermal processing is the microbial destructionor the enzymatic inactivation, while affecting as less as possible the quality attributes of the food items. The intensity of thermal processing is quantitatively described by mathematical methods (General and Formula) and depends on the heat transfer phenomena, the psysico-chemical and the thermo-physical properties of the products and the thermal destruction kinetics of both undesirable and quality factors. The simulation of a thermal processing can be efficiently performed using a Computational Fluid Dynamics (CFD) program and the thermal impact of the process on the food can be accessed. The canned table olives preserved in brine (NaCl solution) and the canned peaches preserved in syrup are significant products for Greek economy. During this study, a simulation of the thermal processing of two products: a) table olives of the Greek varieties Kalamon and Konservolia and b) clingstone peaches, was conducted using a CFD program. The thermophysical properties of the two mentioned products, as well as the thermal degradation of texture of the processed items were determined experimentally. The parameters of the thermal degradation of the olives and peaches were calculated as D62.4ºC =670 min, z=28.6ºC and D93.3ºC =18.5 min, z=17.6ºC, respectively. The geometry of the system was designed based on realistic data of the size and shape of the solid products and their containers. The results, product temperature evolution, for both products were confirmed experimentally for the density of the grid and the time step employed. In the case of the olives, three geometries were designed including small- and full-sized olives of the variety Kalamon and olives of the variety Konservolia. The aim of the study was to apply a thermal process with the minimum thermal effect, , recommended by the International Olive Council. For this purpose, the cans (75x105 mm) filled with olives and brine were heated to 70ºC for 10 min and then cooled in 20ºC for 10 min. In all three cases the least equivalent time was found to be 38.8 (for the full-sized Kalamon olives), 62.4 (for the small-sized Kalamon olives) and 20 min (for the Konservolia olives). The equivalent time reffering to texture degradation of the olives was 10.4-15 min for the full-sized olives of the Kalamon variety, 11.6-15.9 min for the small-sized olives of the same variety and 9.2-16.2 min for the olives the Konservolia olives. In all cases, the maximum velocity of the brine was observed 0.5 min after the initiation of the heating and the cooling step and it was measured to 2.1 cm/s, 2.6 cm/s and 3.3 cm/s, for the small-, the full-sized Kalamon and the Konservlia olives, respectively. Studying the effect of the concentration of the brine, it was revealed that it was almost negligible. On the contrary, the effect of the heat transfer coefficient between the heating-cooling media and the internal wall of the can was significant. According to the selected solved geometries, the heat transfer coefficient was estimated to be at least equal to 1200 and 1000 W/(m2•ºC) for the small-sized and full-sized olives of the Kalamon variety, respectively, while an infinite h was necessary for the Konservolia olives, in order for a to be achieved. In addition, it was found that the time of the thermal processing that is routinely applied in the industrial practice is much longer than the minimum desirable equivalent time. Finally, it was revealed that during the commercial sterilization of the fresh olives (121.11ºC for 45 min) the thermal effect was much higher than the optimized, thus a heating in 121.11ºC for 25 min is recommended. In the case of the peaches, a can (95x110 mm) was designed containing six peach halves randomly and unordered positioned inside the can. The slowest heated zone was identified in the center of the peach half, which was positioned in the bottom of the can. The maximum velocity of the syrup was observed 0.5 min after the initiation of the heating and the cooling step and it was measured equal to 3.1-3.2 cm/s. The target microorganism of the thermal processing was the spores of Clostridium butyricum. The minimum value of the process (20 min at 100°C followed by 10 min at 20°C ) was calculated equal to 33.4 min, which clearly indicates that the lethality is achieved for the target microorganism (target was 1.5-8 min). The value of as estimated from the thermal degradation of the texture, was found to be in a range of 15.3-38.5 min, resulting consequently in an 85-99% degradation of the initial texture. In the case of peaches, the influence of the concentration of the syrup and the heat transfer coefficient between the heating-cooling media and internal wall was significant not only in flow parameters, but also in the thermal effect on the product.In a next investigation, a can (75x105 mm) containing four peach halves in suryp was designed and the effect of arrangement of the peaches inside the can on heat traanfer rates was investigated. In this case, it was found that peach halves in sideways position were heated and cooled faster than the other cases and evenly during the heat treatment. In contrast, the heat flow appeared to differ in peach halves which were upwards or downwards, which affected significantly the heat transfer and the thermal effect on the spores of Clostridium butyricum, as well as the thermal degradation in the texture of the product. At their critical points, peach halves facing towards the top of the can heated considerably slower and cooled faster than the peaches facing towards the bottom of the can. The results of this study could be used in designing of thermal processes with optimal product quality.
Degree
thesis:*- Grantor dc:publisher
- Agricultural University of Athens
- Year dc:date
- 2015
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Dimou, Andreas
- Δήμου, Ανδρέας
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/36405