Aristotle University Of Thessaloniki (AUTH)
Μελέτη των δυναμικών θερμομηχανικών ιδιοτήτων και της εκχύλισης αναλλοίωτων μονομερών σύγχρονων οδοντιατρικών νανο-ϋβριδικών και νανο-σύνθετων φωτοσκληρυμμένων υλικών
Abstract
dc:descriptionPolymer composite materials for dental restorations are a modern, highly interesting, research field. They consist of two main phases, the polymeric network produced by a mixture of dimethacrylates such as Bis-GMA, Bis-EMA, UDMA or TEGDMA, and the inorganic filler load, mainly SiO2 and other silicates. The division into nanofilled composites and nanohybrids is based on the particle size distribution of reinforcing filler. The researchers internationally have proposed some liquids as food/beverages or oral simulators, and their use allows us to rapidly examine the wear caused to the materials, along with other processes that may occur, such as sorption and elution of substances. Undoubtedly, the physicochemical and mechanical properties of the materials are strongly influenced by the presence of solvents/solutions simulators. Five modern, commercially available, products are the subject of this research, namely Filtek™ Supreme XT Body (3M ESPE), Filtek™ Supreme XT Translucent (3M ESPE), Grandio® (Voco GmbH), Protofill- nano (Association of Dentists, Thessaloniki) and Tetric EvoCeram® (Ivoclar Vivadent AG), which present different ingredients and characteristics. The technique of photopolymerisation (λ= 410-500 nm) is applied to cure the samples; their curing time was investigated by FT-IR and established in 60 s. Wearing and ageing liquids for those materials included H2O, artificial saliva SAGF® and 75%v/v EtOH/H2O. The time exposure periods ranged from one day up to three months. Dynamic Thermomechanical Analysis (DMTA) is suitable for such materials experiments, which exhibit viscoelastic behaviour while mimic the cyclic masticatory loads the restorations receive within the mouth. Thus, all the composites exhibited two Tg (the glass transition temperature is an important feature), when the measurements were made after short immersion intervals, and one Tg for longer ageing time. It has been concluded that the amount of the inorganic portion in a polymer composite affects the mechanical properties, which are enhanced with increased presence. The influence of warmer liquid environment-stay results in post-polymerisation of the material in short-time exposure and plasticization in long term; the effect of the ethanol solution is particularly burdensome for the materials. High Pressure Liquid Chromatography (HPLC) detects the unreacted monomers or hydrolysis reactions’ derivatives formed during extraction in the above-mentioned media. The application and validation of the appropriate analytical method may quantify the ingredients eluted. From the foregoing monomers, which polymerize due to structural differences in different degrees, the interest accumulates on bisphenol derivatives. Their extraction is enhanced in aqueous and ethanol mediums. Not only the portion of polymer content, but also the size of the dimethacrylates, seem to affect the elution of unchanged monomers in simulating liquids, into oral cavity and human organism by extension.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2015
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Vouvoudi, Evangelia
- Βουβούδη, Ευαγγελία
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/36424