National Technical University of Athens (NTUA)
Limit state numerical procedures for cyclically loaded elastoplastic structures
Abstract
dc:descriptionCivil and mechanical engineering structures are generally subjected to high levels of loading. Heavy traffic or waves are the main source of cyclic loading on civil engineering structures, like bridges, pavements, and offshore structures. On the other hand, mechanical engineering structures like nuclear reactors, aircraft gas turbine propulsion engines also operate under high levels of cyclic thermo-mechanical loads. Under all these kinds of loading, these structures are forced to develop plastic strains.The asymptotic steady state behavior of an elastic-perfectly plastic structure under cyclic loading may be determined by incremental time-stepping calculations. Direct methods, alternatively, have a big computational advantage as they attempt to find the characteristics of the cyclic state right from the start of the calculations. Moreover, it very often happens that the complete time history of loading is not known, but only its variation intervals. In these cases, direct methods are the only way to establish safety margins. Thus, this PhD thesis initially aimed at developing a modern direct method to determine the long-term effects of an elastoplastic structure subjected to a given cyclic loading time history. Any steady state, like elastic shakedown or alternating plasticity or ratcheting may be predicted. The method, called RSDM, focuses on the expected cyclic nature of the residual stresses at the steady state. Thus, the unknown residual stresses are decomposed into Fourier series that have the same period as the cyclic loading. It is the coefficients of these series that are estimated through an iterative procedure. It is proved that an update of these coefficients may be found by calculating the integral of the cycle time derivatives of these residual stresses inside a loading cycle. These derivatives may be estimated at discrete cycle points by enforcing equilibrium and compatibility at these points. The procedure converges uniformly to an elastic shakedown state or to unsafe cyclic total stress, which may be used to mark the regions that develop plastic strains. The method then continues to determine whether the applied loading would lead the structure to incremental collapse or to low-cycle fatigue.Furthermore, the RSDM was used to manufacture a more general method the RSDM-S, which may be used to determine the load bearing capacity of cyclically loaded elastoplastic structures by producing safety margins against excessive inelastic deformations. The developed RSDM-S procedure constitutes a new upper bound approach to provide the elastic shakedown factor for structures under any combination of cyclic thermo-mechanical loadings. The procedure generates a descending sequence of loading factors, through the use of RSDM, which shrinks the load domain until the residual stresses become constant in time. Both the two methods were formulated within the finite element (FE) method. The efficiency of the approaches is shown through examples of application.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2015
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Panagiotou, Konstantinos
- Παναγιώτου, Κωνσταντίνος
Subjects
dc:subject × 23- Πλαστικότητα
- Ανακυκλιζόμενη φόρτιση
- Άμεσες μέθοδοι
- Προσαρμογή
- Εναλλασσόμενη πλαστικοποίηση
- Συσσωρευόμενη πλαστικοποίηση
- Ολιγοκυκλική κόπωση
- Επαυξητική κατάρρευση
- Σειρές Φουριέρ
- Plasticity
- Cyclic loading
- Direct methods
- Shakedown
- Alternating plasticity
- Ratcheting
- Low cycle fatigue
- Incremental collapse
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Civil Engineering
- Mechanical Engineering
Rights
dc:rights- Statement dc:rights
-
- BY_NC_ND
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/36539