University of Ioannina
Ανάπτυξη προηγμένων, νανοδομημένων καταλυτικών υλικών για ενεργειακές και περιβαλλοντικές εφαρμογές
Abstract
dc:descriptionIn this thesis two series of mesoporous silica supported perovskites catalysts were synthesized, using two different preparation methods, coprecipitation and impregnation method. The first group includes inorganic mesoporous silicate materials loaded with perovskites with general formula x% LaCoO3, x% LaFeO3, x% La0.5Sr0.5FeO3 and x = 10, 20, 30 and 50% where x = total mol metals/ mol Si. The second group is based on a successful synthesis of mesoporous chiral silica impregnated with perovskites and x = 10, 20, 30 and 50%. The final aim of this job was to use these materials as catalysts in the reaction of reduction of NO by CO and the catalytic decomposition of nitrous oxide N2O. Moreover, regarding the second group of materials, our scope was to maintain the chiral structure of the silica after the integration with the perovskite oxides.The preparation of the first group of materials, took place in one-step procedure and includes CTAB and polyacrylic acid (Pac) as a co-structure directing agents. Pac and CTAB are complexed by zip-type mechanism creating the mesophase, which act as a backbone of the structure. The complexion is based on the ionic interaction between the positively charged polar head of CTAB and the carboxyl anion of Pac. On the external surface of this mesophase hydrolysis of TEOS takes place producing negative charged silica oligomers. On the same time amounts of perovskites are introduced in the mesostructure by their complexion with carboxyl group of Pac. The synthesis of the second group of materials took place in two steps. Firstly, mesoporous silica synthesized using achiral cationic surfactants CnTAB (C16TAB or C18TAB), anionic SDS and the copolymer Pluronic P123. As source of silicon was used TMOS. In the second stage, perovskites were loaded on the helical silica by the wet impregnation method. The final solids were calcined at 600 oC.The prepared materials were characterized by X – ray diffraction (XRD) at low angles to determine the formation of the mesoporous structure, but also at high angles to identify the perovskite phase. The morphology of the catalysts was examined by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The specific surface area of the materials was measured by N2 porosimetry, and the results were analysed using the BET equation and I-point method.The catalytic behavior of the supported perovskite oxides was studied for two different reactions. The first is the catalytic decomposition of N2O and the second the redox conversion of nitric oxide by carbon monoxide (NO+CO). Both those reactions have a strong environmental interest as nitrogen oxides (NOx) are important pollutants in the atmosphere.All the above are presented in the following three chapters of this thesis. The first chapter includes a literature review. The second chapter deals with the synthesis and characterization of materials prepared by coprecipitation method using polyacrylic acid, as well as the synthesis and characterization of chiral silica and the synthesis and characterization of supported perovskites on chiral silica. Finally, the third chapter includes the study of the catalytic activity of the prepared catalysts.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2015
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tsaousi, Eleni
- Τσαούση, Ελένη
Subjects
dc:subject × 12Rights
dc:rights- Statement dc:rights
-
- BY_NC_ND
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/36597