Back to search

University of Ioannina

Κατασκευή και χαρακτηρισμός διαφανών ηλιακών κυττάρων υψηλής απόδοσης

Abstract

dc:description

Τhis doctoral thesis focuses on the design, fabrication and electrical characterization of large surface area (156 X 156 mm2) semi-transparent mono-crystalline silicon solar cells with high efficiency. The semi-transparency of our large surface area cells was achieved by creating periodic patterns of ellipses on industrially manufactured and high efficient silicon solar cells using a CO2 laser beam. The design of semi-transparent solar cells became in such a way as to achieve uniform transmittance of incident sunlight combined with low production cost. In the fabrication process of our samples we managed to distribute, over the whole surface area of the cell and at precise positions, the two-dimensional periodic pattern of ellipses in order to achieve uniform transmittance of incident sunlight. Secondly, but very important result of that research, is that we effectively minimize breakages of the thin and large surface area cells during the laser cutting of the pattern elements, by invented and constructed a novel two-level metal base. Analysis of the electrical data shows that the efficiencies of our fabricated large area semi-transparent Si solar cells, with transparencies from 2.9% to 5.4%, vary between 13.2% and 14.2%. Most importantly the analysis shows that the efficiency of a semi-transparent cell depends not only on the total surface area of the elements to be removed by laser cutting but also on the total length of their perimeters. In the second part of this doctoral thesis we investigated and defined the optimum conditions for making reliable lead free interconnections, using copper ribbons covered with environmentally friendly soldering alloys, on commercially manufactured Si solar cells. For replacing the traditional eutectic soldering alloy, two different binary eutectic lead free alloys have been used Sn96.5/Ag3.5 and Sn42/Bi58 with melting temperatures 221°C and 139°C respectively. For studying the performance of the Pb-free interconnections different samples from the two alloys were repeatedly exposed in concentrated solar radiation up to 16 Suns (16X) using Fresnel lenses. Analysis of the electrical measurements shows that the lead-free interconnections were fully responded for extracting the high electric currents generated by such cell while simultaneously demonstrated mechanical stability despite the rapid rise of their temperature due to high concentrations.

Degree

thesis:*
Grantor dc:publisher
University of Ioannina
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Makris, Theodoros
  • Μακρής, Θεόδωρος

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/36678

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Makris, Theodoros; Μακρής, Θεόδωρος. Κατασκευή και χαρακτηρισμός διαφανών ηλιακών κυττάρων υψηλής απόδοσης. University of Ioannina, 2013. http://hdl.handle.net/10442/hedi/36678