University of Patras
Υπολογιστική και πειραματική διερεύνηση φαινομένων μεταφοράς μάζας και θερμότητας σε πρότυπη εργαστηριακή εγκατάσταση μηχανικής ξήρανσης
Abstract
dc:descriptionThe objective subject of this thesis is the computational and experimental investigation of heat and mass transfer phenomena in a new laboratory mechanical convection drying unit, which was designed, constructed and equipped with measuring equipment and an integrated control system of collection and processing of experimental measurements. In laboratory drying unit there is an option to change and control the main parameters of which affected the thermal drying process, such as speed, temperature and humidity of the drying air. Measurement of the removal of moisture content in the dried product is carried out through high precision load cells, and the spatial distribution of the flow velocity at the entrance of the drying chamber during of each experiment, is continuously measured by pitot tube array and a system composed of solenoids and a pressure transducer. The spatial distribution of temperature and velocity in the drying chamber is possible by means of sensors fitted to a computer controlled cartesian motion system which is designed, constructed and placed at the outlet of the vertical drying chamber, constituting an integral part of the facility. All measurements were performed on the vertical drying chamber while it is possible to conduct measurements in a horizontal layout of the drying chamber.In this thesis became systematic experimental investigation of convective drying sliced quince and studied the effect of various parameters affecting the thermal drying process in this agricultural product, for air temperatures of 40, 50 and 60 Celsius and air velocities 1, 2 and 3 m/s. The purpose of the measurements was to determine: (i) the effect of temperature and air velocity in drying curves of cylindrical quince slice, (ii) the effect of the thickness of the cylindrical slice of quince in drying curves, (iii) the effect of the orientation of the cylindrical quince slice, in the direction of incident flow, in the drying curves (iv) the adjusting of the drying curves in several simple thin layer drying models v) the effective moisture diffusivity coefficients for each case with the slope method which correlated with the temperature of the drying air so that the diffusion coefficient of moisture be ex-pressed by Arrhenius type equation form and vi ) the interfacial heat and mass transfer coefficients which expressed as a function of dimensionless numbers Nu, Re and Pr in the form Nu=aRe^(b)Pr^(1/3).The simulation of the flow and temperature fields in the drying chamber and the calculation of the interfacial heat and mass transfer coefficients around the surface of the product were performed using the tools of Computational Fluid Dynamics (CFD). CFD simulations were steady state, considering turbulent flow while drying chamber and cylindrical slice of quince specialized as an axisymmetric two-dimensional configuration. As turbulence model was used the SST k-ω model while on the approximation of the boundary layer near the walls of the product the LRNM was chosen. By solving the flow and temperature fields determined distributions of interfacial heat and mass transfer coefficients in front and rear of the cylindrical slice of quince for all experimental conditions. The calculation of the weighted average prices of the interfacial heat transfer coefficient indicates a correlation between dimensionless numbers Nu, Re and Pr, in the form Nu=aRe^(b)Pr^(1/3), which as finding enriches the existing literature.In the final stage of the thesis, developed and evaluated in comparison with the experimental measurements, a one-dimensional transient numerical model of heat and mass transfer to simulate drying curves in cylindrical slices of quince. The heat transfer inside the quince is considered to be by conduction while the moisture transfer is considered to be governed solely by liquid diffusion. Evaporation is considered to take place only from the windward and leeward surface of the quince slice. The numerical model takes into account the shrinkage of the cylindrical slice of quince, assuming that the cylindrical volume decreases each time as much as the volume of water that evaporates on both surfaces of the slice. The numerical code used the thermophysical properties of quince and air from the literature, the effective diffusion coefficient of moisture experimentally determined by the meth-od of the slopes, while the transfer coefficients used the weighted average prices of interfacial heat and mass transfer coefficients derived from the simulations with CFD (non-conjugated approach). In order to achieve higher accuracy between experimental data and predictions, a non-linear regression analysis, using an Arrhenius type effective diffusion equation, was also performed. However, preliminary result, obtained using the SQP (Sequential Quadratic Programming) and Internal Point algorithms for the minimization of the Chi-square function (χ^2) showed only small improvement of the calculated results with a significant increase of the computational cost. In conclusion, the overall assessment of the results of the numeric code shown that the proposed numerical model based on diffusion is able to effectively describe the coupling of heat transfer and mass, as to capture the time evolution of moisture content and temperature within the product, with minimum use of experimental input variables and minimum computational requirements. For these reasons it may be considered appropriate to analyze the convective drying process in any organic or non-organic product.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2015
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tzempelikos, Dimitrios
- Τζεμπελίκος, Δημήτριος
Subjects
dc:subject × 24- Ξήρανση κυδωνιού
- Συντελεστής μεταφοράς θερμότητας
- Συντελεστής μεταφοράς μάζας
- Υπολογιστική ρευστοδυναμική
- Ενεργός συντελεστής διάχυσης υγρασίας
- Εργαστηριακή εγκατάσταση ξήρανσης δια συναγωγής
- Μέτρηση πεδίου ροής και θερμοκρασίας
- Σχεδιασμός και προσομοίωση
- Quince drying
- Heat transfer coefficient
- Mass transfer coefficient
- CFD
- Effective moisture diffusivity coefficient
- Laboratory convective dryer
- Flyid flow and temperature field measurement
- Design and simulation
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Περιβαλλοντική Μηχανική
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Engineering and Technology
- Mechanical Engineering
- Environmental Engineering
- Other Engineering and Technologies
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/36791