Back to search

University of Patras

Μέτρηση υψίσυχνων ταλαντώσεων με GPS δειγματοληψίας 100Hz

Abstract

dc:description

The possibility of the newly introduced GNSS receivers, with sampling rate up to 100Hz, for broadening the limits of application of GPS technology toward measuring the displacements of stiff (high-frequency) Civil Engineering Structures was studied in the present thesis. The new generation GPS receivers present a great challenge for various applications since they offer a sampling rate similar to the sampling rate of traditional instruments used in vibration measurement/monitoring like accelerometers and seismometers.The noise characteristics of the 100Hz GPS measurements were studied on the basis of systematic “supervised learning” experiments where instantaneous coordinate time-series from stationary receivers or receivers performing motions with known characteristics permitted to study static and dynamic noise of several types including noise due to dynamic multipath. The last phenomenon has been identified during the measurements of the response of bridges due to excitation by passing vehicles.The study of noise characteristics indicated that the correlations and noise amplitude is highly dependent on the PLL (Phase-Locked Loop) bandwidth used by the GPS receiver. The use of a 100Hz PLL bandwidth ensures uncorrelated instantaneous coordinates but at the cost of high amplitude noise (standard deviation approximately 3mm and 6-7mm along the horizontal and vertical axes respectively). The noise spectrum is characterized by a power-law with colored noise affecting low frequencies up to approximately 0.5Hz and white noise affecting higher frequencies. A methodology for the reduction of noise of the instantaneous coordinate time-series using band-pass filtering has been designed on the basis of the results of the experimental data. Application of the methodology permits the identification of millimeter level dynamic displacements similar to the ones developed during structural vibrations.The methodology was applied on the measurements of the oscillations of a timber bridge in Patras, Greece. Oscillation amplitudes around 60-70mm and a fundamental natural frequency of 0.92Hz were identified along the lateral axis of the bridge on the basis of unfiltered GPS coordinates. The first natural frequency along the vertical axis was estimated at 6.5Hz. After the de-noising of the GPS coordinates vertical oscillation amplitudes of around 3mm were successfully identified.The main result from the experimental and analytical investigation carried out in the present thesis is that the newly introduced GPS receivers with sampling rate up to 100Hz provide the opportunity of more detailed measurement of the oscillations and extraction of the dynamic characteristics of relatively flexible structures as well as the broadening of the limits of applications of GPS toward the measurement of dynamic displacements of stiff (natural frequencies >5Hz) structures.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Moschas, Theofanis
  • Μόσχας, Θεοφάνης

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/36792

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Moschas, Theofanis; Μόσχας, Θεοφάνης. Μέτρηση υψίσυχνων ταλαντώσεων με GPS δειγματοληψίας 100Hz. University of Patras, 2014. http://hdl.handle.net/10442/hedi/36792