Aristotle University Of Thessaloniki (AUTH)
Σύνθεση και χαρακτηρισμός νέων ανιονικών χρωμάτων συμπλόκων με μέταλλο διαφορετικό του Cr και συμπλόκων μειωμένου περιεχομένου σε Cr για τη βαφή πρωτεϊνικών και πολυαμιδικών ινών
Abstract
dc:descriptionMetal complex dyes are the predominant dye class for the dyeing of wool, nylon and silk due to their superior fastness properties to wash and light compared to the non-metallized acid dyes. Metallization generally leads to bathochromic shift and due to this metal complex dyes are duller and mainly are used to produce deep depths of shade offering fastness properties which are unattainable with common acid dyes and thus fulfilling high customer demands. The metal introduced in the molecule of an acid dye enhances the light fastness by offering protection of the azo chromophore against ultraviolet degradation. Usually metal complex azo dyes are predominantly complexes of Cr (III), Co (II, III), and Cu (II). However, the manufacturing and application processes involving the treatment of metallizable dyes with Co(II), Cr(III) and Cu(II) ions are of great environmental concern due to the fact that the metals used are considered to be priority pollutants. The past decade has been marked by a growing interest in the development and use of ecologically friendly dyes. This concept led to the consideration of other less toxic metals such as Fe and Al salts as metallizing agents and possible substitutes for metals such as Cr, Co, Cu and Ni. Disposal of dye house effluents is a major environmental consideration and presently is commonly being done by a combination of physicochemical and biological treatments which reduce the organic charge of the effluents drastically. Recently, due to the greater environmental demands, novel techniques have been developed for the minimization of heavy metal content in the industrial effluents. Ultra-filtration technology is one of newest technologies applied for the treatment of textile effluents aiming at the elimination of toxic pollutants in the discharged effluents. In this present work a simplified novel one pot method of synthesis of metal-complex anionic azo dyes (Cr-, Co-, Fe-, Cu-, Al-, Zn-, Ni-, Mn- complexes) and the subsequent minimization of the metal-content in the final dye by ultra-filtration was carried out. Two anionic azo dyes were used for the metallization that differs in one - ΝΟ₂ group. The commercially available corresponding Cr- complexed dye, Neutrilan Navy MBR (Acid Blue 193) was used as a reference for metal complex azo dyes I and the Neutrilan Black MR and Neutrilan Black MRX (Acid Black 194), were used as references for metal complex azo dyes II. The use of ultra-filtration allows the production of highly concentrated, purified, metal complex dyes with drastically reduced free metal and electrolyte content. The ultra-filtrated dyes have drastically improved solubility properties when compared to their non ultra-filtrated counterparts. The elimination of heavy metal and inorganic salts from the dye formulation allows the production of novel dyes of high concentration and purity with improved properties and more environmentally friendly compared to the ones conventionally made. All dyes (before and after ultrafiltration) were characterized by FT-IR, UV-Vis, NMR and their melting points. XRF analysis and atomic absorption measurements were performed for the determination of free and total metal-content for the synthesized metal complex dyes before and after ultra-filtration. All of the synthesized dyes (before and after ultra-filtration) were applied for the dyeing of wool and polyamide fibres and colour measurements and fastness properties tests (wash, light, rubbing) were carried out. Water based inks contain typically 30-80% water as a proportion of the total mass of the ink together with a water miscible organic solvent such as a monohydric alcohol and the colorant. The preparation of the inks was made using water and a mixture of 2-propanol/ethylene glycol as the water miscible solvent. Ethylene glycol was acting also as a wetting agent. The surface tension, pH, viscosity and conductivity of the above formulations were monitored over a period of 180 days. Monitoring a formulation over a period of time is a widely accepted method for evaluating dispersion stability. A printing test on a wool fiber was carried out using the Cr-complex(II) ink.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Zarkogianni, Maria
- Ζαρκογιάννη, Μαρία
Subjects
dc:subject × 20- Υπερδιήθηση
- Χρώματα σύμπλοκα με μέταλλα
- Ψηφιακή εκτύπωση
- Αζωχρώματα
- Πρωτεϊνικές ίνες
- Πολυαμιδικές ίνες
- Όξινα χρώματα
- Μεμβράνες πολυαιθεροσουλφόνης
- Ultrafiltration
- Metal complex dyes
- Ink-jet printing
- Azodyes
- Protein fibers
- Polyamide fibers
- Acid dyes
- Membranes pes
- Φυσικές Επιστήμες
- Χημεία
- Natural Sciences
- Chemical Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/36797