Aristotle University Of Thessaloniki (AUTH)
Μελέτη και ανάλυση μίκρο- και νανομετρολογικών διατάξεων
Abstract
dc:descriptionThis dissertation's scope is to present, simulate and model, by using computational methods from different length scales, the operation of a virtual atomic force microscope and some modern applications in material science. More specifically we have examined experimental and computational calibration methods of Silicon microbeams, the interactions of Silicon and Carbon nanotips with semiconducting samples for topographic and nanoscratching applications and the vibrational and mechanical properties of composite Si/Ge nanobeams. Initially, we present results from the calibration of RTESPA microbeams that are used in tapping-mode atomic force microscopy. More specifically, we have implemented dimensional measurements with SEM and vibrational measurements with AFM assuming either rectangular or trapezoidal geometries. FEM models were used to examine which factors influence the cantilever's elastic stiffness (tip, inhomogeneities in the trapezoidal cross section, reflective top layer etc.). Results from Sader method are compared to the other two methods. All measurements are given with their combined relative uncertainties. Next, we investigated the AFM's response with or without a sample using lumped parameters modeling. This study aims at the identification of the parameters that influence the system response in tapping mode, the system simulation using parameters that were experimentally validated and the study of non-linear phenomena such as chaotic trajectories, thermal noise, stochastic resonance etc. For performing atomistic simulations we present a molecular dynamics code that we developed for the virtual atomic force microscope project and issues regarding improvements in speed and memory. Next, we introduce a three dimensional MD model for single-point probing of a Silicon step via sequential approach and retract cycles (step in/out mode). Our model accounts not only for vertical tip-sample forces, as often encountered in literature, but also for lateral and longitudinal interactions. In this way, we are able to accurately simulate constant- force approach scans even when the probe targets over steep sample edges. Furthermore, we present a Molecular Dynamics model that simulates accurately the indentation of a Silicon (100) surface by a rigid Diamond nanotip (indenter) and we show that it can be used to create nanochannels on the Si surface, for fluidic applications. Finally, we report the results of MD simulations on the vibrational and mechanical properties of various NWs: pristine Si and Ge, SixGe1-x binary alloys, Si/SiGe superlattices and Si/ SixGe1-x superllatice nanoalloys. We study the effect of structure and composition on resonance frequency, quality factor, Young's modulus and mass responsivity. Possible ways to tune the performance of the nanoresonator, such as hydrogen passivation are also investigated. The possible impact of structure and composition on the Si/Ge resonator's performance could give useful insight on the applicability of such heterostructures as resonating devices.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Georgakaki, Dimitra
- Γεωργακάκη, Δήμητρα
Subjects
dc:subject × 16Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/36924