Back to search

National Technical University of Athens (NTUA)

Μηχανικές ιδιότητες του τοιχώματος των αιμοφόρων αγγείων σε διαταραγμένες αιμοδυναμικές συνθήκες

Abstract

dc:description

Cardiovascular diseases are one of the main causes of mortality in the modern world. Control of the accurate functioning and in-depth exploration of various pathogenesis in the circulatory system becomes imperative both to anticipate and prevent morbid phenomena and to improve the quality of life of patients. The aim of this study was to find material laws-models, suitable for describing the response of various vessels wall, under certain disturbed hemodynamic conditions, created either as a result of interventions, such as arteriovenous fistula, used for hemodialysis, or due to aortic aneurysms. The long-term aim of this study is the future use of these laws in Medicine, for the prediction of the vessels behavior, the assessment of the significance of each incident and the timely and correct decisions to deal with it.The selection of a mathematical descriptor for the passive arterial mechanical behavior has been long debated in the literature and customarily constrained by lack of pertinent data on the underlying microstructure. Our objective was to analyze the response of healthy carotid artery subjected to inflation/extension with phenomenological and microstructure-based candidate strain-energy functions (models), according to species and region. Histological variations among segments were examined, aiming to explicitly relate them with the differential material response. Finally, the best fitting was achieved with the quadratic and Fung-type or four-fiber family model. The latter was structurally justified for all artery types, whereas the quadratic term was justified for transitional and muscular arteries exhibiting notable elastin anisotropy. Diagonally arranged fibers were associated with pericellular medial collagen, and circumferentially and longitudinally arranged fibers with medial and adventitial collagen bundles, evidenced by the significant correlations of strain-energy functions’ parameters with quantitative histology.As for the case of arteriovenous fistula, the time course of the adapted geometry, composition, and biomechanical properties of the porcine jugular venous wall exposed to chronic increases in pressure and flow was examined. The aim of this study was to mathematically assess the biomechanical adaptation of contralateral and grafted venous wall, by characterizing the in vitro inflation/ extension testing data obtained 2, 4, and 12 weeks post-fistula, using a microstructure-based material model. The choice for such a model considered a quadratic function for elastin with a four-fiber family term for collagen, and permitted realistic data characterization for both overloaded and contralateral veins. As structural validation to the hemodynamically-driven differences in the material response, computerized histology was employed to quantitate the composition and orientation of collagen and elastin-fiber networks. The parameter values optimized showed marked differences among the overloaded and contralateral veins, namely decrease in the quadratic function parameters and increase in the four-fiber family parameters, findings that were explicitly associated with the differences in underlying microstructure, namely the reduced elastin and increased collagen contents induced by pressure and flow-overload.Concerning the investigation of the behavior of the vessels wall coming from different organisms and different experimental procedures, the examination of the human abdominal and ascending thoracic aortic aneurysms was included in this thesis. More specifically, the layer-dependent tissue properties, that are non-available in the literature, were studied. Material characterization of ascending thoracic aortic aneurysms was expanded at the different aneurysm regions, except for different layers. This could not happen in abdominal aortic aneurysms for the safety of the patients. Quantitative microscopic evaluation was performed to identify the spatial organization of collagen-fiber network. The uniaxial tension data were simulated with a number of candidate models, among which the four-fiber family (microstructure-motivated) model, especially that including dispersions of fiber angles about the main directions, was superior to the others in the fitting quality allowed, though it presented a practical difficulty in parameter estimation. For this reason, an analysis was conducted aiding the identification of a more specific diagonal- and circumferential-fiber family model for all three layers, with equal fitting quality. Furthermore, a major aberration from almost all existing models in the literature is the hypothesis made that fibers can support compressive stresses. Such a hypothesis needs further examination but it has the benefits of allowing improved fits to the vanishing transverse stresses under uniaxial test conditions and of properly reflecting the exponential nature of the compressive stress–strain response of aortic tissue, being consistent with observations of collagen being under compression in the unloaded wall.The findings presented in this thesis aimed to improve the current understanding of both healthy and pathological tissues, help in clinical decision and optimize endovascular interventions.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Sassani, Sofia
  • Σασσάνη, Σοφία

Subjects

dc:subject × 14

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/37082

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Sassani, Sofia; Σασσάνη, Σοφία. Μηχανικές ιδιότητες του τοιχώματος των αιμοφόρων αγγείων σε διαταραγμένες αιμοδυναμικές συνθήκες. National Technical University of Athens (NTUA), 2016. http://hdl.handle.net/10442/hedi/37082