Back to search

National Technical University of Athens (NTUA)

Μεθοδολογίες ταχείας εικονικής προτυποποίησης και αυτοματοποιημένης εξερεύνησης χώρου σχεδιασμού για συστήματα πολλαπλών συνεπεξεργαστών υλικού

Abstract

dc:description

The increasing design complexity of modern embedded systems and the requirement for high-speed and low-energy design have lead to new design techniques, which aim to bridge the gap between the design complexity and the designer’s productivity, as well as tofacilitate the exploration for optimized design solutions. Towards the first goal, Virtual Prototyping enables the modeling and simulation of the system-under-design, without the need for hardware devices, in multiple levels where architectural details are omitted for reducing the design complexity. Towards the second goal, the automated Design Space Exploration utilizes algorithms which aim to find optimized design solutions, avoiding the time-consuming (and sometimes infeasible) exhaustive exploration of the design space. However, due to the need for faster virtual prototyping and the existence of emerging architectures for heterogeneous systems and interconnection means among the architectural components, more efficient simulation/co-simulation techniques and high-complexity design space exploration methodologies are required. Towards this direction, the goal of this PhD Thesis is (a) to propose efficient simulation techniques for faster but accurate system evaluation, also supporting the co-simulation with other platforms; and (b) to present exploration procedures for design spaces with increased complexity, which addressthe design requirements of modern systems.In the first case, one of the proposed techniques is to avoid non-productive simulation phases, so that no valuable time is wasted during the system evaluation. Another rapid simulation technique is the simultaneous evaluation of multiple design solutions during a single simulation, providing increased parallelization during the exploration procedure. In addition, the presentation of co-simulation techniques with the host and/or a real hardware platform provides even more solutions for the efficient system prototyping. In the above techniques, it is important to achieve an accurate system simulation, even in higher abstraction levels. Towards this direction, the hardware accelerators are characterized in terms of timing, area and power consumption, using High-Level Synthesis, while a power annotation technique for Central Processing Units is introduced, without requiring all the architectural details of the processors. In the second case, an exploration methodology for heterogeneous many-accelerator systems is proposed, which applies a different configuration for each accelerator according to the computational requirement. However, as the design complexity increases exponentially, the proposed methodology utilizes design space reduction techniques, aiming to higher-quality design solutions. A similar methodology is proposed for the efficient exploration of Hierarchical Networks-on-Chip, i.e. networks, the nodes of which are sub-networks, each of which has a different configuration according to its communication requirements. In this case as well, the increased design space is reduced for achieving a more efficient networks design. Finally, a design and implementation procedure is presented for heterogeneous 3D Networks-on-Chip, which utilize a mixture of 2D and 3D routers. During this procedure, it is investigated about which vertical connections between different layers should be removed, as well as how the final system components will be placed among the layers of the 3D chip. In both decisions, a requirement is the system speed improvement and the power consumption reduction. The efficiency of the proposed methodologies is studied through qualitative and quantitative comparisons with typical simulation and exploration techniques, by using fully-developed algorithms not only for multimedia and digital signal processing but also for medical applications. In any case, the proposed methodologies significantly contribute to the domain of the efficient design of modern embedded systems.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Sotiriou-Xanthopoulos, Efstathios
  • Σωτηρίου-Ξανθόπουλος, Ευστάθιος

Subjects

dc:subject × 28

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/37243

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Sotiriou-Xanthopoulos, Efstathios; Σωτηρίου-Ξανθόπουλος, Ευστάθιος. Μεθοδολογίες ταχείας εικονικής προτυποποίησης και αυτοματοποιημένης εξερεύνησης χώρου σχεδιασμού για συστήματα πολλαπλών συνεπεξεργαστών υλικού. National Technical University of Athens (NTUA), 2016. http://hdl.handle.net/10442/hedi/37243