Back to search

University of Ioannina

Ανάπτυξη σύνθετων υλικών μεταλλικής μήτρας και αξιολόγηση της περιβαλλοντικής συμπεριφοράς τους

Abstract

dc:description

The manufacturing of Al Matrix Composites reinforced by TiC ceramic particles is the aim of thepresence effort.Al matrix composites were produced by melting Al-alloys (Al6060, Al356, Al319, Al20Cu, Al20Cu(FeNi)and a prototype Al-alloy AlMgSi (7 wt% Mg and 5 wt% Si)) and adding TiC particles in 5 vol% and 15vol%. Composites were produced either by direct addition of TiC particles in to molten Al or dilution of a“master composite” Al-TiC (~ 20 vol% TiC). TiC particles were added always in equal quantities withKBF4 salts. Microstructure development of all monolithic alloys and produced composites was studied.Also the resistance of monolithic alloys Al6060, Al356 and Aml7Mg5Si and their composites with 5vol% and 15 vol% were studied, in sliding wear and in electrochemical corrosion in two differentsolutions (3.5% NaCl and DHS).It is shown that KBF4 salts have successfully contributed to the dissolution of oxide layer on the top ofmelting Al and thus making successful the import of TiC particles into melting Al-alloy, whilestrengthening the composite by AlB2 ceramic phase.The TiC distribution is relatively homogeneous. Particles are located both at the grain boundaries(isolated and clustered) and within the grains (isolated) and also particles are located at the areas ofthe lastly solidified liquid (isolated and clustered too). In some occasions particles are associated withthe presence of various intermetallic phases. All the distributions are explained by thermodynamicterms.The results of sliding wear tests showed that TiC particles reduced the wear rate of monolithic alloys.The morphology into the wear track is a characteristic formation of “hills and valleys”. This morphologyis changed after the addition of TiC particles. After the TiC addition, the debris shape is changed too.Observations of the wear track and the debris, lead to the development of a wear mechanism, which isbased on the surface oxidation and plastic deformation of the examined materials, on the cracksformation and their growth to the final delamination from the material.In parallel the new monolithic alloy Al7Mg5Si and their composites, showed similar behavior with twocommercial alloys Al6060 and Al356 (very known for their anticorrosive characteristics) and theircomposites in electrochemical corrosion. Similarity of the form of polarization curves and similar valuesof electrochemical figures, showed similar corrosion mechanisms for all materials regardless TiCamounts, which shows the dependence of the corrosion to the precipitations of the monolithicmaterials. Also the microstructures examination revealed the consistency of Al-TiC interfaces andtherefore, good wettability reached between the interfaces of Al metal matrix and TiC ceramic particlesthus, making the followed casting method successful.

Degree

thesis:*
Grantor dc:publisher
University of Ioannina
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Mavros, Iraklis
  • Μαύρος, Ηρακλής

Subjects

dc:subject × 22

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/37315

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Mavros, Iraklis; Μαύρος, Ηρακλής. Ανάπτυξη σύνθετων υλικών μεταλλικής μήτρας και αξιολόγηση της περιβαλλοντικής συμπεριφοράς τους. University of Ioannina, 2013. http://hdl.handle.net/10442/hedi/37315