Aristotle University Of Thessaloniki (AUTH)
Ηλεκτροχημική σύνθεση μικρο- και νανο- δομημένων "ευφυών" υλικών με βάση τα ημιαγώγιμα πολυμερή
Abstract
dc:descriptionThe research of this study is focused on the anticorrosion properties of thin films of self-doped sulfonated polyanilines (PAn) grown electrochemically by cyclic voltammetry on passive stainless steel (SS), AISI304 and AISI316, using the copolymerization of anilne (An) with aminobenzenesulfonic acids (ABSA). By varying the ratio An:ABSA in the polymerization solution, copolymers P(An-co-ABSA) of a different structure and thickness were obtained, as the copolymerization rate depends on the electronic and steric affects of sulfonic groups. The o-, m- and p-position of the sulfonic group in the benzene ring is a critical factor for the properties of copolymers. The o-position favors the copolymerization. Adequate copolymerization rates were also achieved from An:p-aminobenzenesulfuric acid (sulfanilic acid, SA) mixtures. The copolymerization of An:SA was studied with and without a supporting electrolyte to identify the optimum synthesis conditions and to clarify the copolymerization mechanism as is not previously reported in the literature. Using the electrochemical quartz crystal microbalance, different charge compensation processes were found to occur during the oxidation and reduction of the P(An-co-SA) in comparison with PAn. The copolymerization rate, electrical properties in solutions of different pH and anticorrosion properties of P(An-co-SA) in chloride-free and chloride-containing acid media were also investigated in comparison with the PAn films. Monitoring the open circuit potential and polarization resistance, via electrochemical impedance spectroscopy measurements, for SS| P(An-co-ABSA) electrodes with time in corrosion media showed that copolymers were adequately stable in acid media. Films prevent the general corrosion of SS. Adequate stability exhibited also by the SS|P(An-co-ABSA) electrodes in chloride-containing media. Pits formed on the oxide due to a chloride-induced localized corrosion were repassivated since a self-healing property is initiated by the copolymer, which is reduced and, in turn, is re-oxidized by O2, suggesting an anodic protection mechanism. The protective properties of copolymers during a prolonged immersion of the SS| P(An-co-ABSA) electrodes in chloride-containing acid media are due to the prevention of chloride insertion into the copolymer film and hence of the oxide attack and onset of pitting corrosion. In contrast with the reduced electrochemical activity of PAn in solutions of a pH>4, the copolymers keep to a sufficient degree their electrochemical activity up to a pH=7, where the copolymer film on SS acts as a cation -selective membrane. The adsorption and reduction of hexavalent chromium, Cr(VI) on PAn and P(An-co-SA) films was also investigated to determine the mechanism by which these self-doped conducting polymers can be implemented as membranes for the removal of the toxic chromates. Cr(VI) in aqueous solutions of different pH are adsorbed and reduced by both PAn and P(An-co-SA) films to non toxic Cr(III) ions. Finally, the P(An-co-ABSA) films exhibit an interesting morphology comprising hollow nanospheres and nanotubes, the dimensions of which can be controlled by varying the ratio An:ABSA. This type of nanostructures can be found several other applications such as inhibitor-controlled anticorrosion systems or drug delivery systems and biological systems.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Michael, Kyriaki
- Μιχαήλ, Κυριακή
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/37467