National and Kapodistrian University of Athens
Τεχνικές ελέγχου ορθής λειτουργίας και διόρθωσης επιδόσεων τηλεπικοινωνιακών ολοκληρωμένων κυκλωμάτων υψηλών συχνοτήτων
Abstract
dc:descriptionTesting and performance calibration techniques suitable for integrated RF circuits are presented in this dissertation. Certain performance-affecting circuit elements are designed to be digitally controllable, providing the capability to adjust the performance characteristics of a circuit's instance around their post-fabrication values, throughout a set of discrete states of operation. A set of optimally selected test observables is used to develop regression models for the prediction of the circuit's performance in each state of operation. In the test phase, measurements of the test observables are obtained from a subset of the circuit's states. The processing of these observables enables the discrimination of defect-free from defective circuits. The latter is further accomplished by the exploitation of an extended superset of the test observables, the use of which intends to maximize fault coverage. Moreover, the predicted performance characteristics are also used for the examination of compliance with the specifications and to allow calibration of the RF circuit by identifying the appropriate state of operation at which all specifications are met and, consequently, by forcing the circuit to operate in this specific state. In order to address the problem of accessibility to test observables, a built-in technique is proposed that provides digital readings for the DC levels that are commonly exploited for the calibration of RF mixers. Voltage acquisition is implemented by a simple analog to digital converter that consists of a ring-type voltage-controlled oscillator and a counter. A reading correction method to minimize the uncertainty introduced by process variations and device mismatches in the acquisition circuit itself is described, as well. The application of selection algorithms is also explored, aiming to reduce the number of test observables that are required in order to maintain a tolerable alternate test accuracy, through an optimization procedure that leads to test cost savings due to the reduction of the test conduction complexity and time. The efficiency of the proposed techniques is validated by their application to the testing and calibration procedures of a typical RF Mixer designed in a 0.18um CMOS technology. Simulation results are obtained and assessed, while comparison with similar conventional methodologies is also provided.
Degree
thesis:*- Grantor dc:publisher
- National and Kapodistrian University of Athens
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Liaperdos, John
- Λιαπέρδος, Ιωάννης
Subjects
dc:subject × 13Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/37801