Back to search

Aristotle University Of Thessaloniki (AUTH)

Control of reaching motions by redundant robot systems

Abstract

dc:description

Redundancy in general provides space for optimization in robotics. Redundancy can be defined as sensor/actuator redundancy or kinematic redundancy. The redundancy considered in this thesis is the kinematic redundancy where the total degrees-of-freedom of the robot is more than the total degrees-of-freedom required for the task to be executed. This provides infinite number of solutions to perform the same task, thus, various subtasks can be carried out during the main-task execution.This work focuses on what we consider fundamental in reaching performance to enhance robot acceptability in human-robot shared environments: accuracy in reaching the target, time convergence imposed at will, human-like smoothness of the end-effector and the joint velocities and joint configuration consistency with joint limit guarantee.In particular, this work proposes a redundant arm velocity controllers (kinematic controllers) and torque controllers for reaching, guaranteeing desired completion time and accuracy requirements without the need for trajectory planning. The controllers provides configuration consistency in return motions and hand and joint velocity smoothness. The controllers use in an admittance control scheme given measurements or estimates of external forces is also proposed providing active compliance capabilities in robot–environment interactions.Also, an approach for addressing the inverse differential kinematics of redundant manipulators in the presence of hard joint position constraints is presented. A prescribed performance signal for joint limit avoidance guarantees is proposed that may be utilized in both cases of feasible and non-feasible tasks. In the first case, it may constitute a null space velocity for the primary task velocity mapping; in the second case, it guarantees a solution towards the task goal position by modifying the planned path or generating a feasible path when other algorithms fail.Moreover, this work propose a joint torque control signal that guarantees joint limit avoidance of a redundant arm which may act in parallel with any passive torque controller for reaching targets in relation to the accuracy of the target approach. In this work it is combined with a Jacobian transpose regulator with joint velocity damping.The controllers design are based on the prescribed performance control methodology (PPC). PPC allows us to impose certain specifications on the performance of the output signals of uncertain systems, and in some cases, without even using approximators to acquire information regarding the considered system dynamics.Simulation studies for a 5dof human arm-like robot, a 7dof arm (KUKA LWR4+ 7dof manipulator) and experiments with a 7dof arm (KUKA LWR4+ 7dof manipulator) are performed to verify the approaches and demonstrate the proposed controller’s performance.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Atawnih, Abdelrahem

Subjects

dc:subject × 12

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/37864

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Atawnih, Abdelrahem. Control of reaching motions by redundant robot systems. Aristotle University Of Thessaloniki (AUTH), 2015. http://hdl.handle.net/10442/hedi/37864