Aristotle University Of Thessaloniki (AUTH)
Πειραματική και αριθμητική διερεύνηση της συμπεριφοράς δοκών Ο/Σ διατμητικά ενισχυμένων με αγκυρωμένες ή μη ανοιχτές λωρίδες ινοπλισμένων πολυμερών άνθρακα ή χάλυβα όταν υποβάλλονται σε μονότονες ή ανακυκλιζόμενες σεισμικού τύπου φορτίσεις
Abstract
dc:descriptionThe present PhD thesis aims to investigate the overall behavior of externally strengthened R/C beams using open hoop strips of either CFRP or SFRP with or without the combination of an anchoring scheme. The strengthened beams are subjected to either monotonic or cyclic loadings. The aforementioned investigation focuses on the use of a novel anchoring device developed at the Laboratory of Strength of Materials and Structures of Aristotle University of Thessaloniki and patented at Europe, USA and Canada.The basic investigated material is divided to four sections:1.From the synthetic evaluation of the extended experimental study the following summarised results have been arisen:SFRP strips can be used as an alternative material for strengthening applications.As long as the density of SFRP strips is increased the shear capacity of the strengthened beam is further increased. When an effective anchoring scheme is used the aforementioned remark lacks of importance.The use of an anchoring scheme removes the mode of failure from debonding to either FRP rapture or failure of the anchoring device itself.The influence of type of the imposed loading (monotonic vs. cyclic) is important especially when no anchoring device is utilized (QFRP,monotonic =1.7QFRP,cyclic). When an anchoring device is used the influence becomes less important (QFRP,monotonic =1.37QFRP,cyclic).The behaviour of pre-cracked shear strengthened R/C beams is similar to the behaviour of non-cracked initial beams.2.The proposed analytical model can predict the contribution of FRP strips (Vf,cal) of a shear strengthened R/C beam with accuracy. The ratio QFRP / Vf,cal varies between 0.92 and 1.173.The present PhD thesis is furthermore focusing on the development of a numerical 3D FE model utilizing the software ABAQUS. All non-linear behaviors are simulated (materials, modes of failure, anchoring device…). The comparison between numerical results and experimental results proved to be very good. As a result a tool has been developed to accurately predict the overall shear behavior of a strengthened R/C beam.4.The fourth and last section of the present PhD thesis is focusing on the prediction of the shear behavior of strengthened R/C beams utilizing three international design codes (ACI440-R2, Eurocode8-3, KAN.EPE). The experimental results are compared with the codes’ prediction. When a strengthened R/C beam is subjected to cyclic loadings, a reduction factor should be adopted. Finally all codes should adopt a procedure to safely design an anchoring device. At least the basic equation Qdesign ≤ QFRP,strip ≤ Qancchoring should be proposed.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Katakalos, Konstantinos
- Κατάκαλος, Κωνσταντίνος
Subjects
dc:subject × 16- Διατμητική ενίσχυση δοκών Ο/Σ
- Χρήση ΙΟΠ από άνθρακα και χάλυβα
- Μονότονη / ανακυκλιζόμενη φόρτιση
- Πειραματική διερεύνηση
- Αριθμητικές προσομοιώσεις
- Έλεγχος κανονιστικών διατάξεων
- Shear strengthening of R/C beams
- CFRP or SFRP strips
- Monotonic or cyclic loadings
- Experimental investigation
- Numerical simulations
- Verification of international codes
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Engineering and Technology
- Civil Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/37932