Aristotle University Of Thessaloniki (AUTH)
Παραγωγή υδρογόνου μέσω εντατικοποιημένων διεργασιών ατμοαναμόρφωσης μεθανίου: ανάπτυξη καταλυτών και διερεύνηση μηχανισμού
Abstract
dc:descriptionSteam reforming of methane is the main and most establish process for the production of hydrogen. However, the requirement of elevated temperature due to the endothermic character of the reforming reaction results in low energy efficiency, high operation cost and emissions of green-house gases (GHG). It is, therefore, crucial to develop intensified reforming processes aiming at the production of high purity hydrogen at lower temperature and in one step.The scope of the present doctorate thesis lies in the development of methane steam reforming catalysts that are characterized by high activity in the low temperature range (400-600 oC) as well as high resistance to deactivation factors, such as carbon formation and sulfur poisoning. Furthermore, research within this thesis was focused on the investigation of the mechanism that takes place in the presence of the optimum catalyst and also its application in intensified steam reforming processes (steam reforming in membrane reactor for in situ separation of hydrogen and sorption enhanced steam reforming).The investigated catalysts were Ni and Rh-based catalysts supported on ZrO2-La2O3 and CeO2-ZrO2-La2O3, while a conventional reforming catalyst support was also applied, Ca12Al14O33. The highest activity of the above catalysts in steam reforming of methane and model biogas at 400-550 oC was observed over Ni/CeO2-ZrO2-La2O3 and Rh/CeO2-ZrO2-La2O3. During steam reforming of methane at atmospheric pressure, temperature of 500 oC and S/CH4 ratio of 3, 60-70% of the equilibrium conversion was achieved at residence time as low as 5 ms (GHSV=70000 h-1), resulting in the production of hydrogen-rich syngas (CO concentration in outlet dry stream <5 %). Moreover, Ni(10)CeZrLa showed remarkably stable behavior after 90 h of steam reforming of model biogas at 500 oC and high pressure (7 bar) and minimum accumulation of carbon on the surface (C content of 0.05 wt. %). Rh(1)CeZrLa catalyst under the same conditions showed a slight deactivation of 17% after 90 h, which, however, cannot be attributed to the formation of carbon (C content of 0.15 wt. %). The low amount of carbon formed over both catalysts after 90 h can be ascribed to the presence of ceria in the support which provides active oxygen for the minimization of coke formation and also to the lanthana dopant, known for its thermal stabilization effect and low affinity for coking.Ni and Rh-based catalyst supported on CeO2-ZrO2-La2O3 also showed high activity in the reforming of methane in the presence of C2-C4 alkanes, which are secondary components of natural gas. The presence of higher hydrocarbons was found to affect the quantity and the nature of carbonaceous species accumulated on the surface of Ni(10)CeZrLa, opposed to Rh(1)CeZrLa, on the surface of which almost no carbon was accumulated irrespective of the composition of the reforming feedstock. Furthermore, the investigation of sulfur poisoning showed that Ni(10)CeZrLa was deactivated by only 3 % during the reference test simulating the desulfurizer break down, according to which the catalyst was exposed to contaminated methane (5 ppm H2S/CH4) for 5 h under severe operating conditions (P=7 bar, T=500 oC, S/CH4=3).It is well known that the support can play a significant role in the mechanism of the reaction. The high mobility of lattice oxygen which is attributed to the presence of ceria and is enhanced by the presence of zirconia and lanthana contributes to the activity if the catalysts as well as the gasification of carbonaceous depositions. The active role of lattice oxygen in the reactions scheme was confirmed by temperature programmed methane activation experiments (in the absence of oxidant in the gas phase). Along with the methane decomposition reaction, the formation of carbon oxides and steam was observed with the participation of lattice oxygen.Temperature programmed steam reforming reaction tests with CD4 over Ni(10)CeZrLa showed the observed reaction rate is lower than the respective reaction with CH4 and steam, leading to a normal kinetic isotope effect in the temperature range 400-550 oC (KIE500C=1.4>1). Additionally, normal kinetic isotope effect was observed for the reaction of methane decomposition (KIE500C=1.3>1), which is the same (within experimental error) as for the steam reforming reaction. Over Rh(1)CeZrLa catalyst, normal kinetic isotope effects for the steam reforming reaction (KIE450C=1.5>1) and the methane decomposition reaction (KIE450C=1.6>1) of almost the same value were observed. The results suggest that the rate determining step of the reaction mechanism includes the cleavage of a C-H bond as well as the absence of steam-derived intermediates.The optimum catalyst, Ni(10)CeZrLa was further applied to the intensified reforming processes for the production of hydrogen at low temperature: sorption-enhanced steam methane reforming and membrane reforming. For the production of hydrogen via sorption enhanced steam methane reforming the sorbent CaO-Ca3Al2O6 (66 wt. % CaO) was developed. The sorbent was synthesized via a modified sol-gel method using triethanolamine (TEA) as a complexing agent. During the preliminary evaluation of the sorbent in the CaO carbonation reaction a conversion of 85 % was achieved under severe conditions (690 oC, 15% CO2/N2). The sorption capacity was maintained at high level even after 100 sorption-desorption cycles (only 12 %deactivation). Stability test under sorption enhanced steam reforming conditions (in the presence of sorbent and catalyst) at 600 oC for 20 reforming/sorption-desorption cycles lead to the production of a hydrogen stream of high purity (91 %). The CaO conversion of the sorbent CaO-Ca3Al2O6 after 20 cycles was by only 9 % less than the initial, highlighting the importance of the thermally stable phase Ca3Al2O6. The catalytic behavior of Ni(10)CeZrLa catalyst was also very stable, despite the high temperature applied during the sorbent regeneration step and the presence of steam (desorption at 800 oC, 50 % H2O/He).Ni(10)CeZrLa catalyst was also tested under conditions simulating the constant hydrogen removal from the reaction side of a membrane reformer. Stable catalytic activity was observed after 20 h of operation, while analysis of the carbon depositions showed that the composition of the reaction mixture does not affect formation of carbon (morphology, reactivity and quantity) compared to the conventional steam reforming experiments. As a result, carbon is formed at the initial stages of the reaction and does not accumulate over time.It should also be mentioned that Ni(10)CeZrLa catalyst which was thoroughly investigated in the present thesis, was incorporated in a compact membrane steam reformer, within the framework of the European research project CoMEtHy. The operation of the pilot scale reactor lead to stable production of 4 m3/h of very high purity hydrogen stream (99.9 %) for more than 120 h at 540 oC and pressure of 9.5 bar (reaction side).
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Angeli, Sofia
- Αγγελή, Σοφία
Subjects
dc:subject × 16- Παραγωγή υδρογόνου
- Αναμόρφωση μεθανίου
- Καταλυτικες διεργασίες
- Μηχανισμός ατμοαναμόρφωσης
- Ανθρακούχες εναποθέσεις
- Hydrogen production
- Methane steam reforming
- Catalytic processes
- Steam reforming mechanism
- Carbon depositions
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημεία και Τεχνολογία διεργασιών
- Chemical Engineering
- Engineering and Technology
- Process Chemistry and Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/38031