Back to search

University of Thessaly (UTH)

Διερεύνηση μηχανικών ιδιοτήτων υλικών που παρουσιάζουν ευαισθησία στην υδροστατική πίεση με τη βοήθεια πειραμάτων διείσδυσης

Abstract

dc:description

The subject of the present thesis is the assessment of mechanical properties of pressure sensitive materials through instrumented indentation. Thesis consists of two parts Part A, theory, which includes the description of the most important yield criteria, and the analysis of the Knoop indentation. On Chapter 3, a two dimension model based on the R.T.Shield theory is described, where an indenter with 2β angle, is applied on cohesive materials under plain strain. Chapter 4 describes the plastic flow of rock materials under the influence of a rigid frictionless punch. Chapter 5 presents the model of a cone indenter [D.M.Wood] on cohesive materials. Chapter 6 includes both the analysis of Knoop indentation and the assessment of the ratio (H/E) hardness to modulus of elasticity through instrumeneted indentation. Part B, the experimental part of the thesis, describes the classic instrumented tests such as uniaxial compression test, indirect tensile test, the process of the indentation tests and the description of the materials both natural and artificial. The Chapter 7 describes the process of cement preparation and production, classic instrumented tests such as uniaxial compression test, indirect tensile test (known as Brazilian test) and the microhardness test, in order to define mechanical properties of the materials. Materials with a wide range of modulus of elasticity and angle of internal friction values were tested through Knoop indentation in order to determine the mechanic properties and to prove the validity of the process. The natural stones that have been tested are Tuffeau de Maastricht Chalk, Pietra di Lecce Limestone, Pietra di Vicenza Limestone, Sander Sandstone, Grunnes Soapstone, Portland Island Limestone, Gioia Marble, Lorano Marble, Dionysos Marble and Serena Sandstone. The loads applied varied between 25gr, 100gr, 200gr and 500gr. It was that heavy loads create subsurface fragmentation phenomena. On the other hand very small loads create inappropriate imprints to be measured, contributing to errors. As far as the Knoop hardness medium value is concerned, it was counted 264MPa for cement paste, while on bibliography it is referred between 200 and 300 MPa. It is noted that the measurement of the small diagonal is necessary for the determination of the modulus of elasticity. The determination of modulus of elasticity strongly relies on the ypothesis of the α constant used in the process. Comparing the results for the modulus of elasticity using the α parameter values of 0.34, 0.45 and 1.5 we proved that only α=0.45 makes the results close to real values. Finally the utility of the proposed processes relies on the fact that we can simplify complex, time-consuming and costly experiments of evaluating the mechanical properties (classic compression and tension tests) with new simplified indentation tests that do not remain in quality or miscount the properties of the materials.

Degree

thesis:*
Grantor dc:publisher
University of Thessaly (UTH)
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Athanasiou, Vasileios
  • Αθανασίου, Βασίλειος

Subjects

dc:subject × 13

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/38032

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Athanasiou, Vasileios; Αθανασίου, Βασίλειος. Διερεύνηση μηχανικών ιδιοτήτων υλικών που παρουσιάζουν ευαισθησία στην υδροστατική πίεση με τη βοήθεια πειραμάτων διείσδυσης. University of Thessaly (UTH), 2014. http://hdl.handle.net/10442/hedi/38032