Abstract
dc:descriptionScope of the presented thesis is to asses through thermodynamic calculations and economic analysis the implementation of advanced technologies for capturing the CO2 from power plants which burn fossil fuels as well as from large scale industrial plants such as the cement industry. The study of examined CO2 capture technologies is designed to increase the overall efficiency of the power plant as well as to minimize the energy penalties that occurred by the implementation of the capture technology. This among other is accomplished by incorporating part of the waste heat from CO2 capture plant in the water-steam cycle.Has been examined the technology in which the fuel is burnt in an oxygen enriched environment (partial oxyfuel) in order to generate higher levels of CO2 in the flue gases compared to the combustion with common atmospheric air. Then the CO2 is captured by a common post-combustion system with chemical absorption by amines or is separated from the other components of the flue gases with using of membranes. Has been optimized the oxygen concentration in total combustion air, and the application of this technology in a lignite – fired power plant as well as in a power plant that uses hard coal. Moreover the experimental results of this technology are also presented. The results show that this technology is an attractive choice for CO2 capture especially as retrofit case in an existing power plant.Has also been examined the CO2 capture by the carbonation-calcification technique with using a low quality fuel in the calciner such as Greek lignite. The secondary steam cycle has been optimized through the installation of an intermediate heat exchanger between the solid streams, the using of pre-dried lignite as fuel in the calciner and the necessity or not of cold CO2 recirculation. This technology has been examined as retrofit case in an existing power plant as well as a new build case. From the simulations results that this technology is an attractive choice for CO2 capture as retrofit case as well as for a new build power plant.In addition has been examined the possible combined operation of a cement and an electricity industry with common CO2 capture from both processes with using the carbonation-calcification technology. In this case the CaO that is produced in the calciner of the capture plant from the make-up CaCO3 is used in the cement industry for the production of clinker. Additionally has been examined the possibilities of improving the overall efficiency of both processes while the main advantage of the proposed process is that the two industries can be worked simultaneously or individually with and without CO2 capture.For all examined CO2 capture technologies have been performed economic analysis in order to investigate the installation cost of capture systems, the cost of electricity and the CO2 avoidance cost.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Vorrias, Ilias
- Βορριάς, Ηλίας
Subjects
dc:subject × 20- Δέσμευση CO2
- Καύση σε αυξημένη συγκέντρωση οξυγόνου
- Θερμικές εγκαταστάσεις
- Ανθρακοποίηση-ασβεστοποίηση
- Θερμοδυναμική ανάλυση
- Τσιμεντοβιομηχανία
- Κόστος αποφυγής CO2
- Κόστος ηλεκτροπαραγωγής
- CO2 capture
- Combustion in oxygen enriched environment
- Thermal plants
- Carbonation-calcination,
- Thermodynamic analysis
- Cement industry
- CO2 avoidance cost
- Cost of electricity
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/38078