Back to search

Aristotle University Of Thessaloniki (AUTH)

Ανάπτυξη ολοκληρωμένου συστήματος πυρόλυσης χρησιμοποιημένων ελαστικών με ενεργειακή αξιοποίηση για την παραγωγή ανθρακούχων υλικών: πειραματική μελέτη, σχεδιασμός και κλιμάκωση μεγέθους

Abstract

dc:description

Aim of the present thesis is the study of End of Life Tyres (ELTs) pyrolysis, towards the evaluation of the obtained experimental results, not only for the understanding of the process but also for the design, construction and operation of an integrated ELTs pyrolysis system of pilot scale, continuous operation and capacity of 20kg hr-1, for the production of energy and carbonaceous products. These actions are targeted to the scale up of the ELTs pyrolysis process, from laboratory to pilot and eventually to industrial scale, highlighting not only the problems and technical barriers that hinder the wider application of such a project, but also the solutions, through innovative proposals regarding the valorization of the obtained products, aiming at the substantial strengthening of the integrated ELTs pyrolysis system’s viability.Initially, in this thesis the findings of extensive literature reviews on the physicochemical characteristics of ELTs, ELTs pyrolysis products and Activated Carbon (AC) derived from ELTs pyrolysis char were presented. Following, the experimental study of the thermochemical conversion of ELTs, through pyrolysis, performed in a laboratory scale operation was documented. The study aimed at the identification of the effect of process parameters on product yields and product characteristics. Laboratory scale ELTs pyrolysis was performed on a fixed bed quartz pyrolysis reactor. The study concluded that at 550 °C the thermochemical conversion was completed. The maximization of solid product yield was achieved using ELTs particles of diameter ranging from 15-20 mm, whereas the heating rate and residence time were selected to be 20 °C min-1 and 10 min, respectively. Under these conditions, both the gas and liquid fraction exhibited high calorific values. The obtained pyrolysis char exhibits qualitative characteristics comparable to low-grade carbon blacks.Subsequently, the study of activation of ELTs pyrolysis char was performed on a fixed bed reactor, using steam as activation agent. The experimental results indicate that when activation was performed at 820 °C for a residence time of 30 min, the specific surface area of pyrolytic char increased eightfold. For comparison, chemical activation of ELTs pyrolysis char using KOH as activating agent was performed, in a fixed bed reactor.Following, the results obtained from laboratory scale pyrolysis were used for the design, manufacturing and ultimately the operation of a pyrolysis unit of pilot scale. Pyrolysis products yields and characteristics were found comparable to those obtained from laboratory scale pyrolysis. The findings of this thesis highlight the potentials for the alternative valorization of ELTs, via pyrolysis, in a pilot scale reactor in a continuous and energy sustainable operation. The obtained solid product can either be used as a substitute for commercial low-grade carbon blacks or, can be further upgraded into AC, able to be used on several environmental depollution applications.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Antoniou, Nikolaos
  • Αντωνίου, Νικόλαος

Subjects

dc:subject × 16

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/38086

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Antoniou, Nikolaos; Αντωνίου, Νικόλαος. Ανάπτυξη ολοκληρωμένου συστήματος πυρόλυσης χρησιμοποιημένων ελαστικών με ενεργειακή αξιοποίηση για την παραγωγή ανθρακούχων υλικών: πειραματική μελέτη, σχεδιασμός και κλιμάκωση μεγέθους. Aristotle University Of Thessaloniki (AUTH), 2016. http://hdl.handle.net/10442/hedi/38086